wat are powerplays in cricket?????

Answer 1

Previously, in ODI's, there were no fielding restrictions. The fielding captain could keep his players anywhere he wanted. Then, around the World Cup in 1996, ICC introduced the 15 over field restriction rule. Only 2 fielders were allowed outside the 30 yard circle from the batsmen for the first 15 overs on an innings. And from the 16th over, 5 fielders were allowed to move out. One more important aspect of that rule was that two fielders had to be in catching positions - 15 yards from the batsmen, till the field restrictions applied.

Now, in mid 2005, ICC - headed by one of the slowest batsman - Sunil Gawaskar came up with some changes in the restriction rule. The previous 15 overs of Field restriction is increased to 20 over - in three blocks, called Power Play.

Power Play 1 - Its mandatory for the first 10 overs of an innings in a one day cricket match. Only two fielders outside 30 yards from the batsmen. And two fielders have to be at catching positions..

Power Play 2 and 3 - These are two blocks of 5 overs each. The fielding captain decides when he wants to employ these two block. The moment he calls for the second power play and the third power play, 5 overs from that particular over will have only two fielders outside the 30 yards circle. A captain can't chose for a power play in the middle on an over. He has to tell the umpire in the starting of an over. For example, if the batting team is scoring freely, he can chose not to take power play after the first 10 overs and set fielders at the boundary. And when he sees that run rate in back in control, he can take power play from that over. It can be from 11th over or 21st over. But he has to take these two blocks within those 40 overs. Otherwise, the last 10 overs will automatically be Power Plays.

Note - No catching fielders required during the Power plays. Only for the first 10 overs of the match.

Answer 2

In the powerplay , there are 20 overs where only only 2 fielders are allowed outside 30 yards circle . These 20 overs are divided in the 3 slots :- 10 + 5 +5 .
The first 10 overs are fixed from over number 1-10 .
But the next 2 slots of 5 overs each are taken by bowling side at their own wish .

Answer 3

Power plays are time intervals where only 2 fielders are allowed to save runs beyond the 30 yard circle and
upto the boundry ropes. So it is party time for bastmen and spectators, however, it may be nightmare for the bowlers.
Power play is divided into 3 slots.
1. Compulsory first 10 overs having 6 deliveries each
2. Two optional slots of 5 overs each to be decided by the fielding captain.

Answer 4

Power plays are time intervals where only 2 fielders are allowed to save runs beyond the 30 yard circle and upto the boundry ropes. So it is party time for bastmen and spectators, however, it may be nightmare for the bowlers. Power play is divided into 3 slots.
1. Compulsory first 10 overs having 6 deliveries each
2. Two optional slots of 5 overs each to be decided by the fielding captain.

Answer 5

Powerplay is a clean rule on the subject of fielding regulations in one-day international (ODI) cricket. in the previous, there replaced right into a c4ca4238a0b92382dcc509a6f75849b5-over era on the beginning up of an innings while purely 2 fielders have been allowed exterior the 30-backyard circle. This meant that attacking batsmen have been probably to attain runs immediately in the 1st c4ca4238a0b92382dcc509a6f75849b5 overs, yet could grow to be extra watchful on the tip of the spell. in an attempt to maintain the sport extra thrilling for the duration of the midsection overs, this rule replaced into amended to prepare purely to the 1st c4ca4238a0b92382dcc509a6f75849b0 overs of each and every innings, yet in addition in 2 blocks of 5 overs, Powerplays, which would be used on the discretion of the fielding captain. a million. the 1st block of c4ca4238a0b92382dcc509a6f75849b0 overs in an innings, the place the fielding regulations are precisely the comparable as according to the previous ODI policies, is ordinary as Powerplay a million. it quite is in simple terms 2 fielders are allowed exterior the 30-backyard circle and 2 fielders could be in close catching place. 2) the 1st block of 5 overs chosen on the fielding captain's discretion is ordinary as Powerplay 2. The fielding captain ought to be sure at which element he needs to enforce this rule. He can purely enforce it on the beginning up of an over, presented he informs the umpire [a million]. purely 2 fielders are allowed exterior the 30-backyard circle and the two close catchers at the instant are not needed to that end. 3. the 2d block of 5 overs, comparable to Powerplay 2 is ordinary as Powerplay 3 . 4. The umpire will sign Powerplay via moving his arm in a around action. 5. could the fielding captain % to not workout his discretion, the relax powerplays will immediately start up on the main modern-day attainable element in the innings (i.e. on the beginning up of the 4c4ca4238a0b92382dcc509a6f75849bst and the forty sixth overs in an uninterrupted innings).~