Well...I am new at this... so just wanna make sure I have all the cables connected..
1. 24pin from powersupply to mobo
2. 8 pin from powersupply to mobo
3. "switch on" cable from the case to mobo
4. Reset cable from the case to mobo
5. CPU fan cable from the fan to mobo
6. sata cable from HDD to mobo
7. another stat from dvd burner to mobo
plz correct me if there is something missing or i am wrong...thx!!!
2007-02-15 03:08:23 · 4 answers · asked by Brian S 1 in Computers & Internet ➔ Hardware ➔ Other - Hardware
the cord that splits off from the power supply to all the drives. it has 4 or 5 holes in it that plugs into the back of your hard drive, Disk drive etc
2007-02-15 03:14:53 · answer #1 · answered by sportsfan 3 · 0⤊ 0⤋
24pin from power supply to mobo
8 pin from power supply to mobo
"switch on" cable from the case to mobo
Reset cable from the case to mobo
Processor fan cable from the fan to mobo
sata cable from HDD to mobo
another stat from dvd burner to mobo
another cabel form FDD
2007-02-15 03:45:06 · answer #2 · answered by gambling999 1 · 0⤊ 0⤋
You don't have floppy drive listed. If you have one of those then that will need to be connected as well.
If you have onboard sound and you want to be able to play CDs then you will have to connect an audio cable from your CD drive to the sound input on your mobo.
2007-02-15 03:14:34 · answer #3 · answered by hllywood72 5 · 1⤊ 0⤋
YES U HAD CONNECTED FINE BUT ONE THING U MUST CONNECT THE POWER CABLES AND WITH THAT IDE CABLES
2007-02-15 03:14:05 · answer #4 · answered by arun k 1 · 0⤊ 1⤋