In my 93 dodge eagle vision, I can't get cold or hot air from my a/c. the fans work fine, and I do get a slight temperature change but very little. It just seems to blow air around the same temperature no matter where I turn the dial.
2007-02-13 10:02:03 · 5 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
It sounds like you have a faulty blend door control. The blend door controls the amount of hot and cold air that goes into the vents. Im not too sure how this is controled on your vehicle, some are vacuum operated, some are cable driven, some are electronically controled. I would consult with your local Dodge dealer. Good Luck!!
2007-02-13 10:08:38 · answer #1 · answered by inenvofme 2 · 1⤊ 0⤋
well with this recent cold weather, it could be many things..i recommend checking all the hoses for the system, check ur coolant tank, and the other tanks..most likely u have a leak in ur hose going from the system to ur vents, get a mechanic to fix or check this out if ur not mechanically inclined.
2007-02-13 10:07:47 · answer #2 · answered by jon f 4 · 0⤊ 0⤋
You need to start the engine and pop the hood and cut the a/c on and see if the a/c comp is coming on , if it comes on and then right back off it is low on freon and needs to go to the shop good luck
2016-05-24 06:48:19 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Sounds like your r12 or 133 is low. Get the freon level checked, and you may want to check if your compressor is kicking in when you turn on the ac. If its not, check the relay for it in you negine fuse box.
2007-02-13 10:05:58 · answer #4 · answered by i am corban 2 · 0⤊ 2⤋
Check your thermostat.
2007-02-13 10:10:16 · answer #5 · answered by Dick G 2 · 1⤊ 0⤋