Where do I go to activate AGP on my computer?
2007-02-12 17:33:59 · 3 answers · asked by hobbes 2 in Computers & Internet ➔ Hardware ➔ Other - Hardware
I'm guessing you've installed a new video card into an AGP slot but nothings coming out. Well you don't exactly activate it, you actually disable your integrated video card which is on your motherboard through the bios. Boot your computer and tap F2 (normally its F2) until the bios menu comes up. With in that menu system you will find video and set it to disabled. This will allow the video signal to come in from your AGP card when you save and exit the menu.
2007-02-12 17:41:42 · answer #1 · answered by prmaples 4 · 0⤊ 0⤋
AGP slots factory should already be activated but if not you have to go into the system bios and activate it. When you first turn your computer on there is a certain key or keys you push too get into system BIOS most of the time it tells you. It's different on almost all PC's
2007-02-13 01:39:27 · answer #2 · answered by hayesbh69 2 · 0⤊ 1⤋
It will activate itself when you connect a Graphics Card to it. No need to activate it manually.
2007-02-13 01:44:14 · answer #3 · answered by Sarvesh K 2 · 1⤊ 0⤋