truck tire air pressure
2007-02-12 15:20:11 · 7 answers · asked by Anonymous in Cars & Transportation ➔ Other - Cars & Transportation
Says right on the tire what the pressure is for the rated load. Normally 50-80 psi.
2007-02-12 15:23:04 · answer #1 · answered by Hambone 4 · 0⤊ 0⤋
Dump Truck Tires
2016-12-18 13:22:03 · answer #2 · answered by minogue 4 · 0⤊ 0⤋
The enormous number of square inches on the inside surface of the tire distributes the weight of the truck evenly thorough out the tire - since the pressure is in pounds per square inch (PSI), the increase is very minimal. Consider, it takes very little air pressure to support a vehicle - 28 PSI does it nicely in an average car.
2016-05-24 03:54:37 · answer #3 · answered by Anonymous · 0⤊ 0⤋
As much as it takes to stop the tyre from being too flat, but not more than the tyre's listed maximum. Yes, this means that it changes every time you load it. Some small dump trucks can use as low as 40 psi, and some can use as much as 150 psi. Your vehicle's handbook should give you the usable range for your vehicle.
2007-02-13 02:52:03 · answer #4 · answered by Me 6 · 0⤊ 0⤋
depends on the tire, but you can go as low as 85 to 100+ so look on the sidewall on the tire to make sure. Good Luck.
2007-02-12 15:29:22 · answer #5 · answered by sclbravo 2 · 0⤊ 0⤋
depending on make of tire cause pressure of 65 in that area
2007-02-12 15:26:02 · answer #6 · answered by retainnon15 2 · 0⤊ 0⤋
Depends on tire size, I run 10.00-20 steel radials at 100PSI on my steering axle and 90PSI on my dual rears. Hope this helps!
2007-02-12 17:31:51 · answer #7 · answered by Sawmill 7 · 0⤊ 0⤋