English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

3 answers

It's not getting a signal from the video card. Perhaps the problem is in your system board, or your monitor.

2007-02-12 12:59:30 · answer #1 · answered by ZORG 3 · 0 0

there might be a loose power cable at the monitor / leave the monitor signal cable unplugged from the computer and you would see a check signal cable message on the monitor / leave the monitor in this state and see whether the monitor shuts down by itself / if yes , then surely you have problem with the monitor / else it might be a video card / before taking any descission it is recommended to use another available monitor and see whether the results are same / if the results are same on both the monitors then it is a video card / try reseating the video card / reseat system memory (RAM) / according to me it might be an memory or video card

2007-02-12 21:07:44 · answer #2 · answered by girish4music 4 · 0 0

Go into Start,control panel,performance and maintenance ,power option's,set turn off monitor,never / turn off hard disks ,never / system standby , never.

2007-02-12 23:43:04 · answer #3 · answered by Larry-Oklahoma 7 · 0 0

fedest.com, questions and answers