Does painting over mold, make it go away?

Answer 1

YES IT DOES. GOOD JOB TOUGH GUY

Answer 2

Spray it with straight bleach or 1/2 bleach and 1/2 water and let it air out for a week. Make sure that what ever caused the problem to start with no longer exist. We just had to tear out a wall and replace a roof to stop the problem. There is an additive that you can add to paint that will help to keep the mold from regrowing. Home Depot sells it. Do not use Behr paint, its terrible paint and takes too many coats to do the job. Go with glidden or Sherwin Williams, water base for walls, oil base semi gloss for trim

Answer 3

You need to wash off mold with 10% bleach solution , let dry , then paint with a oil based primer such as BIN or Kilz. Two coats best. Sand smooth if needed between coats but always follow sanding with a final coat of the primer. This is the ONLY way to prevent recurrence. Oh BTW find out where moisture is coming from & resolve that too. Bathrooms need an exhaust fan for sure.

Answer 4

There's this powder that they sell in home improvement stores (usually the paint department) that you can mix in your paint that works as a mildew repellent. Now, for grout, simply spray bleach about 2 to 3 times a month. That should keep it nice and mold free. ;)

Answer 5

Absolutely not, you have to first treat it with a part water/clorox solution without over saturating the sheetrock. Once dried, paint one coat with Kiltz to get a fresh paint surface that won't bleed and then paint with your final color.

Best of luck...mold is scary stuff, not to mention a definite health hazard...

Answer 6

No, it will not. You need to clean the area with a bleach solution and let it dry completely. Then I would recommend starting over with a good primer before painting, after checking for any loose paint or damaged wallboard/plaster which must be repaired. You can add your wall color to your primer to help lay down a good colored base for your finish coat/ or second coat. The brand name "Kilz" is an excellent primer for handling your walls.

Answer 7

do away with that mildew! this is a well being risk. Use rubber gloves a respirator and protection glasses. sure, mildew is THAT undesirable. Steam cleansing won't do away with mildew, in basic terms sell extra boost! Use bleach first of all and additionally a purifier rated for molds and fungus. After a radical cleansing, permit it dry thoroughly and paint it with a paint rated for mildew resistance. i'd do purely away with it, yet while it has sentimental cost to circulate , try cleansing it, yet in spite of everything of your efforts, mildew would come back. in spite of everything timber is pourous and intensely problematic to get all of it.

Answer 8

Nope - it will just come back through the paint. you need to clean off the mold and seal the wall - builder's PVA adhesive will seal it but you must clear all the mold off and let it dry out first then seal it - let it all dry and then repaint.

Answer 9

only if the place you are painting is compleltry dry and the mold has stopped growing

Answer 10

ummm no. You have to wash the wall/floor/ceiling, what ever with bleach. Lot's of it. if that doesn't work you need to replace the drywall. good luck.