I have an engine but i'm not sure how much power its got. Its a 350 bored to a 355 its got a edelbrock intake and carb(600cfm) headers wtih purple hornies glass packed mufflers, I think the heads have 1.94" intake 1.50" exhaust possibly 75 cc combustion chambers. It has a comp cam, but im not sure of the lift, but its not a very rough idle. I think thats about it but i could be wrong on some of these specs.
2007-02-12 09:47:03 · 7 answers · asked by brian_baetz 2 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
I'm thinking about 325 RWHP as well
about 330ftlbs of torque
get you a M S D ignition and you will see more torque and horses of the wide range!!
2007-02-12 11:52:47 · answer #1 · answered by The King 6 · 0⤊ 0⤋
Depending on the cam's lift, it's probably very close to 300 hp. Probably not very high compression and edelbrock's are pretty mild. The heads sound like they are a step above stock.
2007-02-12 20:10:03 · answer #2 · answered by Polamalu is God 5 · 0⤊ 0⤋
You'd be lucky if your even pushing 200 horse maybe 250 at the wheels and your toque should be around 275 to 300
2007-02-12 21:08:09 · answer #3 · answered by bfranz48154 1 · 0⤊ 0⤋
most 350 only have 250-300 hp but with the other stuff i would gess around 325-350
2007-02-12 19:48:42 · answer #4 · answered by Phonzy O 1 · 0⤊ 0⤋
My guess, anywheres from 250-375 HP
Depending on the heads and cam...
2007-02-12 19:20:08 · answer #5 · answered by Anonymous · 0⤊ 0⤋
sounds like its a 300 to 325 hp motor
2007-02-12 18:35:54 · answer #6 · answered by bayareart1 6 · 0⤊ 0⤋
is it in the vehicle? get it on a rolling dyno for the whp (whp is more useful than crank horsepower).
2007-02-12 17:49:08 · answer #7 · answered by Timothy S 3 · 0⤊ 0⤋