when the hazard ligts r turned on on a saxo they only flash on driver side but indicators do work seperatly?

Answer 1

Its the switch. There's nothing wrong with the bulbs and the relay that makes them flash is also working. You've proved this simply by using the indicator stalk.

It has to be the hazard switch. Get yourself to a breakers yard and you should be able to pick one up for around a fiver. They should just pull out, swap over the connector and hey presto, you can park on double yellow lines again.

Answer 2

Either your bulbs are knackered, the wiring is up the duff or you have a fuse blown somewhere if they are only flashing on one side.
All the indicator lights should flash both front, back and even the little indicators on the side of the car.

Check these out and if you still can't solve the problem then take it to your Citroen dealer.

Answer 3

Its an old one this.
Usually its the wires that go into the fuse unit get a little worn try giving them a a pull up and down motion this usually sorts them out.
If this does not work go to your friendly spares shop and ask them if you can try a new flasher unit to see if that sorts it.

Answer 4

either abad earth or u av blown the bulbs on the side that doesnt work.or because its basically a saxo

Answer 5

hi Lewis it is going to probably be the relay, think ofyou've got to look on your e book to make certain which one, yet had a simialr porblem on my 406, many years again. desire this helps..

Answer 6

replace the hazard warning switch and your problem will disappear

Answer 7

could be the haserd switch plying up or dodgy conecter on the switch it self

Answer 8

It sounds like it needs "Ze Electrician"

Answer 9

Probably someone hasn't wired them up correctly.

Answer 10

this is what happens when you buy cheap french tut