2007-02-11 08:20:39 · 14 answers · asked by Anonymous in Games & Recreation ➔ Hobbies & Crafts
You can buy jigsaw gluefrom most stationary shops.Coat the finished jigsaw in this and then let it dry.
2007-02-11 08:26:13 · answer #1 · answered by Anonymous · 2⤊ 0⤋
what you should of done first is the frame you are using open it and take the back out,the do the jigsaw on that,so you would be doing it on the board of frame,then when finished all you need too do is put the glass on the front and then frame,
2007-02-12 21:33:32 · answer #2 · answered by craftyliz 2 · 0⤊ 0⤋
Two ways:
Mod Podge is the best to glue and seal.
or
Cut your mat board to size.
Flip your puzzle over. (slide a poster/mat board under and one over and flip carefully - use help from others as needed)
Then spray your cut board with spray adhesive. Some are temp and some are permanent, so spray outside to avoid unnecessary mess.
Then lay the glue side against the back of the puzzle.
Once you turn it over, verify everything is in place immediately.
Remember to avoid direct sunlight and consider special glass for framing to help protect it.
2007-02-13 03:26:56 · answer #3 · answered by ksuetx 2 · 0⤊ 0⤋
Go to a website that sells puzzles and you'll find a kit for sale to do exactly this. It comes with a backing and an adhesive so you can mount your puzzle. You could also use Google or Dogpile and look up "puzzle mounting kit."
A local crafts or hobby store may also sell these, if you don't want to wait for it.
2007-02-11 08:25:11 · answer #4 · answered by thejanith 7 · 0⤊ 0⤋
pull it apart in big peices of like forty or fifty... and put them on a piece of cardboard and then add another piece on top, then flip it over, glue it, and the put it together in the frame itself and then glue all the big peices together, and then add the back end... it works for me... that way you dont have to take it apart all the way...
I had a 5,000 piece puzzle and i had to assemble it on two different tables... but after i finished it, i took the two halves and pulled them into halves... so i had like four peices of 1250 and i glued them all together on the backs... then set them in a big enough frame... and then it worked fine....
2007-02-11 08:31:38 · answer #5 · answered by Anonymous · 0⤊ 0⤋
The last time I did it, I slide a cardboard under it and one on top, flip it over and brush it over with a multi-purpose glue that dry clear. Have Fun!
2007-02-11 12:11:51 · answer #6 · answered by SatayGirl 2 · 0⤊ 0⤋
If you can manage to turn it over (sheet of glass on the surface, then 'flip' it) - you could use Fablon (clear would be best) to put over the back of your jigsaw.
**You not be able to re-do the puzzle as it will really stick down.
2007-02-11 08:27:06 · answer #7 · answered by Froggy 7 · 0⤊ 0⤋
You could have made it in the frame to start with but I guess it is too late for that now...
2007-02-12 20:15:33 · answer #8 · answered by Not a number 1 · 0⤊ 0⤋
They make a glue for puzzles that you can put on the front and it dries clear
2007-02-11 17:14:40 · answer #9 · answered by annabelle b 1 · 0⤊ 0⤋
you could put it on a table and then slide it onto a picture frame.
2007-02-11 13:02:41 · answer #10 · answered by allycat 2 · 0⤊ 0⤋