Anyone refer to a link where I can see pistures or read instructions how to do it???
2007-02-11 04:48:12 · 2 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
If you are asking this kind of question, it is obvious you do not have the first important item, BUY A HAYNES, or CHILTON manual, these books are, or should be the first item purchased when attempting to do ANY maintenance/repair work on ANY vehicle. I have been in the automotive repair business for many years, and I ALWAYS check the manual before doing any(except for the most mundane)repairs. I have made a good living from people who start their own repairs, then bring it to me when they cannot finish the work,and for the most part, answer no to the question,'do you have a repair manual for this vehicle?' Do yourself a great favor, buy the book, it is indespensible.
2007-02-11 05:21:03 · answer #1 · answered by Burts chevy 3 · 0⤊ 0⤋
first you disconnect the battery then you unhook the starter wires and remove the starter third you remove the drive shaft by taking the four 12 mm bolts out of the rear end you then take the transmission Mount off and remove any shift linkage and finally you remove the 8 bolts on the bell housing and you are ready to lower the transmission to the ground
2007-02-11 13:26:41 · answer #2 · answered by dewayne s 2 · 0⤊ 0⤋