sometimes it won't go up at all, but if I yank as hard as I can, it will go up slowly (this is the driver side) on the passenger side, I can make the window go down, but it will only go up if I use the passenger side switch, it won't go up with the driver side master switches...are these two problems related?? Thanks
2007-02-11 01:47:47 · 5 answers · asked by Philip N 2 in Cars & Transportation ➔ Maintenance & Repairs
Sounds like a short or a bad switch
2007-02-11 01:50:06 · answer #1 · answered by Anonymous · 0⤊ 0⤋
My 95 Buick does the same with the passenger door window, it won't go down with the master switch, but the door switch works fine...the master drivers panel gets used the most, so it's just that your switches are wearing out. Call around to junk yards and see if someone has a master panel for you, like I did.
2007-02-11 10:09:17 · answer #2 · answered by Michael B 6 · 0⤊ 0⤋
Window motor is going. I've had this happen on my 94 camaro 3 times. (2 driver, 1 passenger) 250,000 miles and still cooking. While you have it all apart, clean the window tracks and grease them. CAREFUL TAKING IT OUT. It can cut/chop fingers.
2007-02-11 10:56:24 · answer #3 · answered by jimponder 5 · 0⤊ 0⤋
Most likely they are. You may have a short in either your relay system or your electrical panal that controls the doors.
2007-02-11 09:50:29 · answer #4 · answered by Kbear 4 · 0⤊ 0⤋
It could be just a loose connection, or a sign that the motor is on it's way out.
2007-02-11 10:08:49 · answer #5 · answered by Harry 5 · 0⤊ 0⤋