Eaton fuller trannys?

Question

Is there anyplace on the internet to get photos of the clutch assembly and any other replaceable parts bearings etc.on the front of a 13 speed,got a bad vibration gone thru everything else gotta be something with clutch or tranny, thanks in advance for any help

Answer 1

You checked your "U" joints? and rear axles? Check to see if somehow your drag axle had gotten locked in
If Not there could be your clutch or throw out bearing or both. But usually if it is the clutch plates your clutch will be slipping.

Best place to find drawings if the clutch and transmission is go to either a Peter-built dealer, K.W dealer, Freight-liner dealer or International dealer. But write down model number of your transmission and clutch. Also your truck's serial number to have to show the part persons.
They should be able to pull it up on micro-fish for you and make you a copy of it.
or you can try http//www.eatonfuller.com/ If I recall correctly that is Eaton's e-mail home page.

Answer 2

http://www.roadranger.com/Roadranger/productssolutions/clutches/index.htm
this is roadrangers website(devision of eaton). youll need to see which clutch you have an easy peadle,a valoe,you might even have an off brand in there,vibration dampened,4,6,8, friction theres alot of different variations. 14 or 15.5 inch clutch. then theres alot of things it could be have you checked the input shaft bearing,is the yoke tight.well if theres anything else i can do feel free to drop me a line hopes this helps

Answer 3

are you sure it isn't in the drive shaft. Carrier bearing. just wondering if you have checked these items as well.