I was reloading my mouse onto my computer as the right click wasn't working. When I turned it on it said it found new hard ware, and then shut down. The tower didn't shut down nor would it reboot. The light on the tower started flashing on and off very quickly. I ended up just unplugging the unit. The next day when I plugged it in, the tower was already on with out me turning it on, however it would not boot up! I am using an old back up computer now...I think I have gone back in time, so if you can help me please, share your thoughts and ideas. SOS!!!
2007-02-10 16:26:13 · 5 answers · asked by roxy2u 1 in Computers & Internet ➔ Hardware ➔ Monitors
By default your bios will not allow your system to boot-up when it detects keyboard or mouse errors.First you need to buy a new mouse considering it started to malfunction.If you are using a wireless mouse it could be the driver.If all else fails,go into safe mode and look under mouse properties to see if the computer even detects it.Safe mode is F8 during boot-up.Some times depending on the motherboard you can go into the bios and choose to run with errors.
2007-02-10 16:40:45 · answer #1 · answered by warpigs 3 · 0⤊ 0⤋
sure this is achieveable for somebody else to shutdown your computing gadget with the aid of trojans that deploy a distant programme on your computing gadget. besides the indisputable fact that it may additionally be a difficulty with the fan as an occasion if the computing gadget is over heated that is going to easily shutdown. would desire to in all risk be a difficulty with the hard disk. you may desire to wana format the computing gadget and notice if that helps if it doesnt i'd take it to a consultant to envision everythings ok interior. the different determination would desire to be to envision the means settings in the adventure that your no longer sitting on the computing gadget and it maintains to be idel for a undeniable of quantity of time the settings would desire to tell the computing gadget to close down so circulate to regulate panel means settings and verify that the techniques to tutor the computing gadget off after 10 minutes or watevas there isnt on.
2016-09-28 22:57:06 · answer #2 · answered by ? 4 · 0⤊ 0⤋
not sure this will help but try plugging it in and then hold down the button that turns it off --- hold it for a few seconds if it fails to turn off in 45 seconds or so unplug it . good luck
2007-02-10 16:36:56 · answer #3 · answered by Ted S 4 · 0⤊ 0⤋
I really hope your mouse wasent PS/2 port! (circular with lots of little metal rods in it.
if it us UH-OH you might fryed your motherboard..
if it was USB, maybe try un-plugging it and turning it on...
please make a new comment on wheater it was PS2 or USB or email me at mathewhildebrand@gmail.com and ill see what i can do
2007-02-10 16:30:56 · answer #4 · answered by Anonymous · 0⤊ 0⤋
jeez... just unplug the stupid power cable
2007-02-10 16:36:47 · answer #5 · answered by ransoft2004 3 · 0⤊ 0⤋