Is an ISOLATED GROUND outlet different from regular outlets?

Question

I know they are orange but are they different inside?

Answer 1

Yes, they are different inside.
A spec. grade receptacle can be grounded by simply screwing it into a grounded metal box.
An orange receptacle with a green triangle on its face does not have a similar connection to ground, it is completely isolated, and requires a seperate grounding conductor.
That grounding conductor travels exclusively to the ground/neutral bonding connector in the main panel.

Answer 2

Yes, very much so, the isolated ground is a receptical that has the ground wire going directly to the ground bar on the electric panel, there will be no other recepticals on that circut. this helps in a few ways, faster and safer grounding. less electrical Iterfierance with other devises , etc, basicly, if there is no other receptical on that circut, there is no chance of a short from another receptical sending any current throgh that receptical from the ground .

Answer 3

be_a_lert is right. for a splash extra readability on circuit a lot.... as quickly as I cord a house, i in no way circulate over 6 instruments consistent with circuit, alongside with lighting fixtures. it relatively is the place different confusion is provided in. human beings think of "thats advantageous, all I even have is a working laptop or pc, television, telephone and a delicate in my place of work" yet you ought to attain that a working laptop or pc is a tower, computer screen, printer, scanner, speaker, and so forth.... so in case you have different upload-ons mutually with your pc, a committed circuit on your pc would no longer be a undesirable thought. although, in case you have a solid skill strip and it relatively is stressed out properly, the worst which could ensue with no committed line is the breaker might holiday now and lower back. my suggestion is as long as you haven't any longer have been given different home equipment (i.e. finished pc set-up plus a fax, great copier, place of work refrigerator, and so forth...) i might cord it with 12 gauge with a 20 amp breaker and you have to be advantageous.

Answer 4

They are typically used for high end electronics and such, so you don't get ANY interference from anything. Its theoretically cleaner power. Yes, they go directly to the "box" ground and an isolated "hot".