2007-02-10 12:36:46 · 2 answers · asked by FIREMAN_911 2 in Cars & Transportation ➔ Maintenance & Repairs
i own a repair shop,and there is no real simple version to installing a head light flasher,it came with a good set of instructions,and they have to be followed to the letter for it to work right i have installed a few of these but there's so many different ones on the market that i cant tell you which wiring diagram you have ,use the instructions provided with it and it will work fine,good luck,i hope this help,s.
2007-02-10 12:43:57 · answer #1 · answered by dodge man 7 · 0⤊ 0⤋
Go to a QUALITY parts store and ask for either a Deitz, Cole-Hersee, or Grote Flasher relay used on school buses. They run about $12.00 TO $17.00, and aren't all that complex to install. There are 5 terminals.
2 for the control relay solenoid, 1 for the "hot" wire, and 1 each for the right and left HIGH beam lamps.
NOTE:---->
This is not approved lighting in any state unless either specifically licensed or is equipment on an official emergency vehicle.
Happy Motoring
2007-02-10 21:04:59 · answer #2 · answered by Ironhand 6 · 1⤊ 0⤋