how do you reset the airbag light on a daewoo car?

Answer 1

To "reset" the airbag light on any car you have to fix the fault that caused the light to illuminate in the first place.
If you just re-boot the Sensing-Diagnostic Module for the airbag (which controls the light) it will find the fault again and re-illuminate the light.

Take the car to a Chevrolet dealer (Daewoos are now badged Chevrolet in most of Europe) and ask them to interrogate the airbag SDM to find the fault code. You can then act on that information to get the fault repaired.

Answer 2

Don't mess with it if you don't know what you are doing..you could cause the bags to inflate and that would cost you around $1000 to fix, and that's just for the air bags.

The bags will inflate and break your windshield, tear apart your steering wheel as well which could cost you another grand to fix so as I said if you don't know anything about them don't mess with it. Just resetting the light can activate the air bags so don't, take it to a dealer and let them do it for you. It will cost you aroun $100 dollars instead of $1000 or more..

Answer 3

Check the owner's manual the reset procedure may be there, if after it's reset it comes back on, take it to the dealer there may be a bad sensor or module at that point.

Answer 4

That's a dealer job.They can do it in about 10 minutes and "should" cost "around" $45-$50.

Answer 5

take the air bag off it, or take the dashboard off it.. who drives a daewoo anyways ??

Answer 6

the light is on for a reason, there's something wrong, take it to the dealer or a mechanic, it's not something to mess with.

Answer 7

you hav to buy a new one !