im installing infinity max modchip (green dot) into my slimline v.12 ps2 and after i installed the infinity modchip the system loaded up fine but after i put the neo fix laser fix modchip the when i plug my ps2 up the red light comes on but when i press the reset button nothing happens it stays red
can some1 please help me?
also im not sure where t1,t2,f1, and f2 (from neofix)go in the motherboard it just says (soider to the motherboard)
2007-02-10 02:25:31 · 2 answers · asked by Slick Rick 60 1 in Games & Recreation ➔ Video & Online Games
you may have not put it in right or messed up a thread on the board. time to test all the circuits to see if 1 is incomplet. best if you send it of and get a warrenty for the work. as so if it is not working they will fix it for free. and if t1,t2,f1,f2 are pins or wires then that is you problem most likely and you need to talk to someone at the maufature to see where these go. refer to the manual for phone#'s to call them.
2007-02-10 02:35:54 · answer #1 · answered by dudedawg20 3 · 0⤊ 0⤋
Sony will not fix it if he modded it.
Open it up and check all the solder points to make sure they're secure, and in the proper place.
Did you try searching for a install guide for your particular chip?
2007-02-10 16:31:21 · answer #2 · answered by tehwood 2 · 0⤊ 0⤋