2007-02-09 12:22:19 · 3 answers · asked by mastertouchdesigns 1 in Computers & Internet ➔ Hardware ➔ Other - Hardware
1. start menu, run
2. type mmc, click ok
3. press Ctrl+M
4. click add...
5. select disk management, click add, then click finish
6. click close, then click ok
7. click disk management on the sidebar
8. find cd rom 0 (or similar), right click it
9. click change drive letters or paths
10. select D:, click change
11. select new drive letter, click ok
2007-02-09 12:29:28 · answer #1 · answered by guy 3 · 0⤊ 0⤋
It's not the drive letter that's causing the problem, most likely it's your IDE cable, it's not plugged in all the way or it's bad. Could be your IDE2 port on your motherboard if your CD drive is connected on a seperate cable. Turn off your pc, open the case, check your connections. Or your CD-rom drive in your pc is dead.
2007-02-09 20:28:15 · answer #2 · answered by Anonymous · 0⤊ 0⤋
I had problems with my d drive, thought it was dead. I then decided to restore to latter date, and presto fixed my d drive. You might have to install programs that are lost in the restore, some I had downloaded others had to install again with c.d. Glad I tried that before going to all the hassle and money in getting it fixed professionally.
2007-02-09 20:41:33 · answer #3 · answered by diehard0603 4 · 0⤊ 0⤋