Last painters were Pigs. How do I get the latex paint off the wood work?
2007-02-09 11:50:57 · 0 answers · asked by Skip P 2 in Home & Garden ➔ Maintenance & Repairs
A little tung oil will not only take off the paint, but it will also make the wood look like new again.
2007-02-09 13:23:57 · answer #1 · answered by GenevievesMom 7 · 0⤊ 0⤋
A product called Goof-off. It is the best. I removed four year old paint from natural woodwork, and wood ceilings. You can buy it by the can at Wal-mart, in the paint department. It is cheaper at Walmart than Home Depot. I promise you, this stuff works!
2007-02-09 16:09:28 · answer #2 · answered by girlgerry55 2 · 0⤊ 0⤋
If you are a beginner or have done some woodworking you will find these plans easy-to-follow as the instructions are very clearly written. The woodworking plans are straightforward so they are not complicated at all. Even if you are a total newcomer to woodworking you will simply be able to master all the techniques that are needed and the woodworking skills very quickly by following the concise and clear instructions.
Check the site: https://tr.im/0BVeB
2015-05-03 15:37:25 · answer #3 · answered by Anonymous · 0⤊ 0⤋
A product called Goo Gone available in most hardware stores. It works great and does nto damage the surface the paint has been splattered on it just removes the paint splatters.
http://www.magicamerican.com/googone.shtml
2007-02-09 12:09:09 · answer #4 · answered by richardwelchcolumbus 2 · 0⤊ 0⤋
laquer thinner and a clean rag will do it. also ---- if the paint is in a deep place, wrap a cloth around the puddy knife and clean. but dont rubb to hard, slowly.
those pigs were not painters. so please don't use that term painter.... to those kind of people. i am a painter and good one i have been told. those kind of guys have made a bad reputation that care for the trade.
2007-02-13 07:43:27 · answer #5 · answered by J 4 · 0⤊ 0⤋
Ted Mcgrath is a very dedicated and experienced woodworker who knows what he is talking about when it comes to woodworking and DIY projects s he has been a woodworker for many many years
Check the site https://tr.im/pQXBE
2015-03-02 10:35:14 · answer #6 · answered by Carolina 1 · 0⤊ 0⤋
just use a good putty knife.
latex pops right off wood.
2007-02-09 15:45:26 · answer #7 · answered by deco 6 · 0⤊ 0⤋
heat gun and a scraper of various sizes depending on the detail of the trim. ask the hardware guy to explain it's use. very easy
process.
2007-02-09 12:01:17 · answer #8 · answered by barrbou214 6 · 0⤊ 0⤋