My washing machine Zanussi ZWF 1210W is leaking water from underneath. The door seal gasket has become loose from the drum, is there any other way of replacing the seal gasket apart from taking the drum out from the back of the machine - can you get to it from the front.
2007-02-09 06:24:04 · 3 answers · asked by chez_fletch2002 2 in Home & Garden ➔ Maintenance & Repairs
Ive changed the door seal on our machine`s quite a few times. Roll back the rubber and see if its held by a fine wire with a small nut & bolt on the end.Check all hose connections i.e. to the pump & at the back where the bearing is situated on the drum. Hope you get it sorted
2007-02-09 06:39:15 · answer #1 · answered by Gary Crant 7 · 0⤊ 0⤋
I've changed the seal from the front on a Servis and a Hoover. Should imagine Zanussi is the same.
2007-02-09 14:27:54 · answer #2 · answered by Del Piero 10 7 · 0⤊ 0⤋
there is a spring that holds the door seal onto the drum,can be awkward to put back on. not a major fault.
2007-02-09 14:35:18 · answer #3 · answered by Anonymous · 0⤊ 0⤋