2007-02-09 04:56:35 · 10 answers · asked by l2brennan 2 in Home & Garden ➔ Do It Yourself (DIY)
I think I understand your question, however some of the answers seem to be off (discussing subflooring).
If I'm correct you want an exposed grid of wood as the finished surface for your shower stall.
My choice would be teak, the same wood that is used in marine application and decks of boats. Strong, light and water resistant. You will need to treat the wood with teak oil, however it is a beautiful wood and very durable. Some places even sell door mats made of teak that could be thrown on to the floor to create a layered look. -- Hope this helps.
2007-02-09 05:34:39 · answer #1 · answered by James 2 · 1⤊ 0⤋
I would use teak. I am not aware of any other easily obtained wood that will stand up to the moisture. Do not use pressure treated wood. The poison in the wood will be touching your feet and that could kill you.
They also make plastic wood that looks like real wood and can be glued and nailed. Check Home Depot, Lowes, Or Menards.
2007-02-09 07:37:07 · answer #2 · answered by united9198 7 · 1⤊ 0⤋
Teak is a great answer although another could be bamboo. As bizarre as it sounds bamboo can be prepared (milled) to look just like wood with incredible hardess which is what redwood and cedar lack.
2007-02-10 03:16:57 · answer #3 · answered by just jack 1 · 0⤊ 0⤋
If you looked in the millions and millions of homes built in the last 10 years they don't use special lumber under the shower. The key is moister prevention. As long as the shower is properly sealed there should be no issues under your shower.
2007-02-09 05:18:34 · answer #4 · answered by HiphopAnonymous 2 · 0⤊ 0⤋
Use Teak wood. It is durable and will withstand the constant moisture. It will need to be treated with teak oil. You will love the results.
2007-02-09 06:00:02 · answer #5 · answered by jewel 3 · 1⤊ 0⤋
Teak is what they use on boats.
Plastic wood is another good suggestion.
2007-02-09 10:39:51 · answer #6 · answered by speedgeek 2 · 0⤊ 0⤋
Pressure treated pine or cedar. They are the only two that will not rot under unfavorable moist conditions.
2007-02-09 05:05:56 · answer #7 · answered by Dave 5 · 1⤊ 0⤋
Cedar is imperfious to water, and it is easy to work with. It is costly, but would look really nice as an accent!
2007-02-09 09:54:04 · answer #8 · answered by michael m 5 · 0⤊ 0⤋
Use pressure treated,tell them at the building supply store what you'll be using it for so you can get the proper grade for your project...
2007-02-09 05:21:37 · answer #9 · answered by Tony H 2 · 0⤊ 1⤋
ply wood, topped w/ green or blue wetboard (sheetrock designed for wet areas)
2007-02-09 05:06:18 · answer #10 · answered by Sugar Pie 7 · 0⤊ 4⤋