Why in the world would you want to do that? You would be destroying the handling on one of the coolest bikes on the road today.
Leave that stuff to the bling boys on the inline four sport bikes and go out and ride!
2007-02-09 02:58:43
·
answer #1
·
answered by Bob 2
·
0⤊
0⤋
I've seen some dubious things done to motorcycles and bolting a 10"~12" chunk of alloy to the swing arm has to be one of the most stupid. (as is paying $300.00 plus for $40.00 worth of alloy???)
It effectively lowers the spring rate ( you have a longer lever) so bike bottoms out easier (rear brake set up is also highly suspect??)
You will then probably lower forks until front wheel hits either radiator or exhaust pipes. ( take a good look at your friends bikes)
Either get it done correctly ( welded swing arm extension, modified spring/shock) or go for 'the look' of a drag bike and trailer it everywhere
2007-02-11 05:03:40
·
answer #2
·
answered by 1crazypj 5
·
0⤊
0⤋
You must possess an unbelievable memory to remember all of those dreams in such detail.Sometimes a dream just happens because you've been constantly thinking about the same thing over and over.Sometimes it happens in order to explain what's goin on in your life,good or bad.I'm not sure what your beliefs are,but there's also the possibility that its a ghost making this happen.Its impossible for a dream to put bruises on you unless the dream was making your hands physically assault yourself or throwing yourself into or against an object,leading to the bruises.Otherwise,a ghost is the only other explanation for what physically hit you.Lets say a ghost can attain a spiritual level between 1 to 10,with 10 bein the level that makes it a saint.A ghost with a higher # can control another ghost with a lower level.It can make the lower powered ghost do things to a human,against its will.Maybe this is what's happening. or maybe your mind is using these dreams to warn you about dangerous people
2016-05-24 01:00:09
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
If you mean the suspension dog bones, use your existing ones and get an engineer to make some to your spec.
if you want the swing arm exended for drag racing try JMC engineering or Metamex engineering in the uk, bear in mind both mods with alter the handling of the bike
2007-02-09 08:23:18
·
answer #4
·
answered by Gix 1
·
0⤊
0⤋
I take it you are trying to lower the rear end of your bike? If you are a good motorcycle repair shop will be able to modify your existing swing arm to lengthen it. I had it done on my 93 soft-tail, lengthened it 1 1/2 inches, it made the scooter squat right down on the road. Hope this is helpful.
2007-02-09 03:01:03
·
answer #5
·
answered by johnkmayer 4
·
0⤊
1⤋