English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Think I've found the right software for this (Audacity) but bit usure what cables I need to transfer over the tapes. DO I just need a single plug mic cable that I run from the tape player out into the mic of my PC?

2007-02-08 23:06:57 · 7 answers · asked by tannadicelegend 2 in Consumer Electronics Music & Music Players

7 answers

Audacity is best for this in conjunction with Levelator Software, which is also Free!
Levelator will take out a lot of the Noise that you will also record.
You will have to initially save to WAV or AAC format and then use Levelator. Only then should you convert to MP3 using Audacity to finish.
You will need one stereo patch cable or two mono patch cables depending on your tape players output configuration. (for 2 channel sound) If you use two cables at the tape end, you will need an adaptor to recombine to a stereo plug for the PC end.

2007-02-09 07:39:11 · answer #1 · answered by WavyD 4 · 0 0

All you like is a recording application and a valid card on your pc. in case you have a working laptop or laptop, probability is it could have one equipped in. For this device, you need to use abode windows checklist or greater effective, acquire some thing like Audacity. connect the output from the cassette participant on your laptop's sound enter socket. For this you elect a cable - 3.5mm plugs on the two ends. Then all you will desire to do is to initiate this device to checklist, press play on your cassette participant, and so on. and flow. it is likewise possible to edit the report later and eliminate hiss, and so on.

2016-12-17 05:54:25 · answer #2 · answered by ? 4 · 0 0

what u gota do is firstly u gota record the music on2 a hardrive as a wave file via soundcard using software like media player or music match or diamondcut32 (DC32) then convert to MP3 via musicmatch or media player. u can use nero these days (aparently) then load on2 ur player

2007-02-08 23:23:23 · answer #3 · answered by Anonymous · 0 0

i did mine thru the wave studio,, all i did was run RCA stereo cable to an 1/4 adapter to the mic input, and converted that way,, it was kinda a pain,, had to do each song seperate to have them load seperate to to media player,, but it all worked out fine :)

2007-02-08 23:21:07 · answer #4 · answered by phllipe b 5 · 0 1

I don't know about that, but Argos sell a contraption that does the job.

2007-02-08 23:16:35 · answer #5 · answered by truth_and_time_tells_all 6 · 0 1

Yes. That is really all you need.

2007-02-08 23:11:25 · answer #6 · answered by Anonymous · 0 1

you got it baby thats all you need

2007-02-08 23:14:27 · answer #7 · answered by Anonymous · 0 1

fedest.com, questions and answers