this tank was put in due to the propane comapny stating we needed a larger tank due to our calls to refill the tank every 3 weeks. We just had the tank fill 20 days ago (500 gal.) and today it is reading below 30%. It is costing a fortune to (almost $900) to fill it each time. What could be wrong that is making me go through so much propane?
2007-02-08 02:46:28 · 11 answers · asked by Frosty Flake 1 in Home & Garden ➔ Maintenance & Repairs
Hmm, let me guess. Cold weather, big house, poor insulation, leaky windows, inefficent boiler/furnace, thermostat set too high
2007-02-08 08:39:57 · answer #1 · answered by buzzwaltz 4 · 0⤊ 0⤋
I would have it checked for leaks ... propane is dangerous where leaks are concerned and if there is a line involved (both to tank and out to whatever is requiring the propane) you'd want to check more than just the tank connection, I don't know what you're running off the propane (appliances or what) but that does sound quite costly (unless you've got a huge building ...
good luck and be safe till you know for sure ... don't let any sparks fly!!!
2007-02-08 03:03:37 · answer #2 · answered by Chele 5 · 0⤊ 0⤋
If you do not own the tank, it is their responsibility to check out any complaint you have about the tank or service. If you tell them you think you have a leak they must come out. It's very dangerous to have a leak.
If you had a leak you would know it. They add a smell to the propane so you know when it has a leak. If it was leaking a lot of propane at the tank not only would you know it, your neighbors would know it. If it is leaking from a connection in the house you would smell it. It smells bad!!
2007-02-08 04:16:23 · answer #3 · answered by At Home 2 · 0⤊ 0⤋
As mentioned, most of the gauges on 500 gallon propane tanks consist of a float unit in the tank bolted or screwed to the top of the tank, with a small readout gauge up top. USUALLY the readout dial indicator is held with two small screws and is coupled to the float unit by a magnet, so it can be removed without unsealing the float unit at all. Mine was stuck indicating 70%. I removed it and tapped it lightly in all directions to get it completely freed up andthen reinstalled it and it is reading correctly now. If the sticking returns or can t be cured then I will have to buy a new dial unit. If it turns out the float unit is stuck or the indicator dial is not designed to be easily removed from the unit then you must NOT try to remove the entire float unit or indicator. The tank must be empty and completely depressurized and the job must be done by a professional.
2016-05-24 06:39:49 · answer #4 · answered by Anonymous · 0⤊ 0⤋
It's been pretty cold the last 20 days or so, this could be an issue... depends where you live and how the house is insulated too. Do the leak check for sure and then check the furnace... a dirty furnace is not efficient. If you haven't had it professionally cleaned in a year, do it.
2007-02-08 03:05:47 · answer #5 · answered by 6kidsANDalwaysFIXINGsomething 4 · 0⤊ 0⤋
This is for heating? Geez that sucks, I'd call the propane company and get some answers. Sounds to me like there is some problem with your tank and they are capatilizing on it. If I were you I'd call the company and ask them what could be the problem. If they don't give you any answers, or try to avoid telling you anything, tell them you'll be in contact with the BBB, if the situation is not fixed.
Be sure you have the BBB number, or local BBB office handy and make sure you tell them you intend to call this number, they will fix the problem in a hurry, if they fail to, call and file a complaint. This similiar thing happened to my sister recently and the company had to keep coming back to fix her furnace, eventually she used the same tactic and the furnace is now working properly and she got all her money back for all the calls she had to keep making for them to come out and fix it.
Sounds to me like there's some crooked company ripping you off, report them.
2007-02-08 02:58:37 · answer #6 · answered by y2kguyarea51 3 · 0⤊ 0⤋
Sounds like you have a leak. Get a bowl and paint brush, or a squirt bottle with soapy water in it and check all the connections on top of the tank. Leaky connections will cause the soapy water to bubble. If it is leaking the gas company owes you some money.
2007-02-08 02:53:40 · answer #7 · answered by J P 7 · 1⤊ 1⤋
Hi, check all lines leaving your tank, and also check your Gage, you probably have a leak, if no leaks, check all of duct work, if furnace is constantly running you probably have a open connection, like I did heating the crawl space!
Denise
2007-02-08 03:16:17 · answer #8 · answered by Anonymous · 0⤊ 0⤋
possible you may have a leak somewhere. check all your connections, using soap/bubble test and then check all your burners, make sure you don't have a leak in your stove. if your water heater is connected on to this, you may want to check the temp setting and also check for leaks. good luck
2007-02-08 03:22:02 · answer #9 · answered by johnny five 1 · 0⤊ 0⤋
What is your thermostat set to? Is your heater working Overtime to keep your house warm? you might just be using it too much. Maybe loko into insulating your house better.
2007-02-08 03:08:51 · answer #10 · answered by sm177y 5 · 0⤊ 0⤋