I restarted my computer back to original factory settings, and am now unable to get my printer re-installed. I have tried using the CD-ROM and downloading drivers from the HP website, but nothing seems to work. I keep getting the message that the drivers are not recognized and the setup/installation fails each time.
Any ideas on how I can get this working again?
I appreciate any helpful suggestions - thanks.
2007-02-07 14:58:37 · 5 answers · asked by sweetienat123 6 in Computers & Internet ➔ Hardware ➔ Printers
Go to HP.com and download the drivers from there. Also most printers now are plug and play which means the computer will recognize the new hardware and automatically install it without the need for the installation CD.
Another way to do it is to go to a BestBuy and see the GeekSquad. They will probably copy the drivers for your onto your own disk for free.
Check the web that is the easiest way.
Good luck.
2007-02-07 15:08:33 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Just go to the hp website and download the driver for your printer, i have the same one and that is what i done.
2007-02-07 15:06:39 · answer #2 · answered by Flossy 1 · 0⤊ 0⤋
go to the hp website put in your printer model number and download the printer drive then install place that printer drive on too cd then your have your printer drive if you need too install again
2007-02-07 15:11:30 · answer #3 · answered by me and you 6 · 0⤊ 0⤋
go to the hp website and download not only the drivers but anything else that belongs with that printer I had teh same problem.
2007-02-07 15:06:32 · answer #4 · answered by c0mplicated_s0ul 5 · 0⤊ 0⤋
Here are the 1613 drivers, Just select your operating system and down load
2016-05-24 05:22:39 · answer #5 · answered by Anonymous · 0⤊ 0⤋