2007-02-07 12:59:14 · 7 answers · asked by Curious Mind wants to know 3 in Cars & Transportation ➔ Maintenance & Repairs
turn the key forward to the on position not starting it make sure the odometer is reading and not the trip. Then turn the key back off. Now hold the trip button in and keep it held in while you turn the key to the on position keep holding the trip button until it says (cant quite remember) it will either show - - - - - or it will just blink and say reset. ANy way hope this helps you it should work.
2007-02-07 13:43:53 · answer #1 · answered by rwings8215 5 · 0⤊ 0⤋
Only a mechanic can reset those lights. If that light is on and you've changed the oil, it is highly likely the problem lies somewhere else. It is also possible the light is set to go off at certain intervals (5K, 10K, etc miles) as a reminder to bring it in for a checkup. Either way, I suggest you get a professional to look at it and find the source of the problem.
2007-02-07 13:03:59 · answer #2 · answered by lafan313 3 · 0⤊ 0⤋
Your upkeep required mild must be manually reset after an oil change purely as defined on your vendors guide. Your automobile has no way of understanding you replaced the oil.
2016-12-03 21:13:25 · answer #3 · answered by ? 4 · 0⤊ 0⤋
If you refer to the "service Reminder" lamp, the owner's manual discusses the procedure.
If you refer to the "Service Engine" or "Check Engine" lamp, the oil change isn't the issue. It is a means of the car's computer to communicate to you that it has detected a fault or failure in one of the systems or circuits monitored, and is directing you to take it to the repair shop or dealer for diagnosis and repair.
Happy Motoring
2007-02-07 13:10:10 · answer #4 · answered by Ironhand 6 · 0⤊ 0⤋
make sure the odometer read the mileage. next, hold down the trip button with one hand,turn the key on with the other hand. the mileage will display broken lines. once all the broken lines start to disappear, reset is done
2007-02-07 13:58:32 · answer #5 · answered by LEXUSRY 5 · 0⤊ 0⤋
look uner the glove compartment and there should be ablue or white box with a black connecter um-plug it and plug it back it should take care of it if it dont disconnect the battery for about 20 minutes and connect it back if it still stays on take to dealer
2007-02-07 13:13:28 · answer #6 · answered by Anonymous · 0⤊ 0⤋
If this was the problem and you fixed it, take it to your local parts house and they will hook a scanner and reset your light.
2007-02-07 13:04:53 · answer #7 · answered by soggybottomboy5005 2 · 0⤊ 0⤋