I have a brand new Burton snowboard and binding. Last night, I screwed in my bindings and they were perfect- angled and sturdy. then, when I went to try out my board today, my bindings were really loose- i could actually spin them in circles. I checked the screws and they were tight and my disc (i have a unidisc) was in place. I am afraid that there is a simple solution to my problem that I haven't figured out. Any suggestions???
2007-02-07 12:16:55 · 4 answers · asked by *city girl* 2 in Sports ➔ Winter Sports ➔ Snowboarding
un do the screws and replace you bindings on the board angle them and then place you disk in place try rescrew them into place if this still doesn't work you may be doing it wrong or they may well be faulty
at this point you should take it to the shop and ask for your bindings to be mounted for you =]
xxxxxxxxxxx
2007-02-08 00:39:47 · answer #1 · answered by Anonymous · 0⤊ 1⤋
Well, from the sounds of it your screws are too long. Did you use the screws that came with the bindings? If you did that, did you use the washers that came with the bindings? If you are using all the supplied hardware and are still having issues take it back to the shop or take it to the On Mountain Repair Shop and have them look at it. It's probably something very simple that is easy to miss. Good luck.
2007-02-08 03:46:49 · answer #2 · answered by Paul G 5 · 0⤊ 0⤋
Take it to a shop and have them look at it. Most sporting goods stores have a department that can look at it and help.
2007-02-07 12:25:22 · answer #3 · answered by km43dragon 3 · 0⤊ 0⤋
bring it to the shop were u bought it they will do it for free.
2007-02-07 12:25:09 · answer #4 · answered by not 1 · 0⤊ 0⤋