ram is the memory of your computer while GHz is something to do with the performance..
2007-02-07 10:07:20
·
answer #1
·
answered by Anonymous
·
0⤊
0⤋
RAM is the Random get admission to memory. you are able to evaluate it because the bottle neck of the pc even as the bottle itself is the not uncomplicated table and the cup you pour the water in is your demonstrate. that's critical to have an outstanding RAM length, often may be those days round 2 Gigabytes. Its % is measured by technique of MHz and GHz in some new pcs the position M in MHz potential Million, G potential Billion, Hz is the Hertz that is a actual unit used for measurement in micro gadgets that radiate or flow One hertz = circulation between 2 factors one time in a 2d. GHz is likewise used to degree the speed of the pc clock, or in different be conscious, the processor %, so once you describe a processor that that's a million.9 GHz for example, this suggests electric powered signal may flow 1900000 situations a 2d in this processor, which reflect a particular % type.
2016-11-26 00:41:11
·
answer #2
·
answered by ? 4
·
0⤊
0⤋
They're two completely different things.
RAM is the amount memory in your machine, sort of like the computer's short term memory. All your files and installed applications are stored permanently on your hard drive, but it's not very fast to just constantly move things on and off the hard drive, so when you load up a file or application your computer puts it into RAM temporarily, and RAM can be accessed a lot faster than your hard drive so it speeds everything up if you've got a decent amount of RAM to hold things in while you're using them. Ram is measure in either MB (megabytes) or GB (gigabytes), but usually MB. A byte is the second smallest unit of measurement of the size of computer data, only bits are smaller.
GHz in this context is the clock speed of your processor, one gigahertz means your machine can perform 1 million instructions per second, so obviously the more GHz your processor's rated at the faster it can do things.
2007-02-07 10:15:41
·
answer #3
·
answered by Bamba 5
·
1⤊
0⤋
GHz (gigahertz) is the measurement used to describe how many instructions your computer's processor can process per second.
2.6 GHz is roughly 2.6 billion operations per second.
RAM is (random access memory) is memory where your computer stores data like software instructions, file contents when it needs to use it. 512MB (megabytes) is about 536 million bytes of data. The RAM is typically found as a chip (or several chips) that can be taken out of your computer and replaced by bigger or faster RAM chips.
2007-02-07 10:16:58
·
answer #4
·
answered by javier 2
·
0⤊
0⤋
Ghz is a frequency at which the ram operates. Pretty much like radio waves. you can only send so much data at certain frequency.
So most ram modules work at certain GHZ ( giga hertz per second )
it usually from 200 mhz to 1333 mhz and up
RAM stands for RANDOM ACCESS MEMORY
now ram is measured in bits, bytes, and giga bytes. A recommendable amount of ram now days. is a 1 gygabyte.
2007-02-07 10:09:59
·
answer #5
·
answered by Archangel 2
·
1⤊
0⤋
ram is mesure in either 512 mb or 1, 2,4 or 8 gig (dont make anything lower too much nemore) and ram is random access memory while ghz is the speed - more ram is typically better because ghz speed doesnt ever vary much (usuall tween 2-3)
2007-02-07 10:09:27
·
answer #6
·
answered by Anonymous
·
0⤊
0⤋