Bought labtop, don't know how to connect with this wireless g router?

Question

I have no idea how to put this connection up. can some1 put instructions, or explain. my router is wireless G router.

Answer 1

With wireless, there is no connection. You just log in to the wireless network.

Answer 2

if your dsl modem and wireless router are together in one unit, then you have to connect the modem to the computer with an ethernet cord, get onto your internet browser, type in the IP address provided in the instructions, and then go into the site and look for wireless and click something to the affect of enable wireless or something like that. if they are not one piece, you should just be able to plug the dsl modem into the wireless router with an ethernet cord and then try to find a wireless network with your computer, using the software provided. email me at [e-mail] for details or more questions.

Answer 3

Whats up?
Well I may not be super qualified to awsner your question. But, if you have a DSL modem/router, There's a number on the buttom of the modem with a gateway key for wireless connections. (2wire espeically) use that number to connect to the modem wirelessly, that what I'm doing as of now.
If your planning on networking I can't help you there.
Hope everything works.

Answer 4

Take the cable provided, plug in to your PC and router.

Follow the instructions provided in the manual to configure your router.

If you are using a Linksys router, you can take a look at the link below:

http://myfile.sg/2pfa/

Answer 5

Set it up in the aes mode with a password.

Answer 6

Ikenna O Is this you? … :)!
http://208.109.69.157/funstuff/extra/extra04.asp?strName=Ikenna_O