I have had a Linksys Wireless-G USB Network Adapter (Model Number: WUSB54G) for about a year with a matching router. The router recently broke and we had to buy a new one and it works fine. But the adapter says "You are connected to the access point, but the Internet cannot be found". My labtop works fine but that computer cannot connect. The signal strength is 100% and so is the link quality. The computer runs Windows ME and is about five years old.
2007-02-04 10:25:38 · 3 answers · asked by Andy 2 in Computers & Internet ➔ Computer Networking
is the signal from the new router encrypted? you may need to change the wireless connection to match the encryption key of the router. (the current one may be using the old router's key)
2007-02-04 10:38:14 · answer #1 · answered by Jordan L 6 · 0⤊ 1⤋
attempt to plug it in for your router with a community cable. open up synaptic equipment manager, hit reload. even as that is carried out, reboot. then click on equipment, administration, hardware drivers, and see if the instantaneous adapter shows up. If it does enable it. This works ninety 9% of the time. If no longer, interior the administration menu, you should make certain a menu merchandise called ndiswrapper. you should use that to apply the domicile windows drivers for that adapter.
2016-11-25 01:58:50 · answer #2 · answered by wehrly 4 · 0⤊ 0⤋
turn off the pc unplug the power from the router and modem for about 30 seconds plug them back in after all the lights come back on restart your computer and try again
2007-02-04 10:30:03 · answer #3 · answered by bsmith13421 6 · 0⤊ 1⤋