If its optical it should move just fine.
Try a different surface for the mouse. Some flat surfaces just don't work well, go fig. If a ball mouse moves faster, then it is the mouse. Try another. If that don't work, it is not the mouse but maybe slow usb. Try getting a adapter for the usb to serial and plug your mouse into the serial port.
2007-02-03 18:55:11
·
answer #1
·
answered by digdugs 3
·
0⤊
0⤋
Make sure you are adjusting the mouse you just installed. When I go to control panel, my PS2 mouse is listed under Mouse (the far right Tab), but the mouse I use most of the time is Listed under Pen Pad which is a small digital pad that also uses a wireless mouse. You may have to go to the Hardware Manager and look under USB devices or it may just be under a different name in the control panel.
2007-02-03 18:54:55
·
answer #2
·
answered by Mike1942f 7
·
0⤊
0⤋
Start- Control Panel- printers and other hardware-mouse
And there u can change to go faster or slower
2007-02-03 18:46:33
·
answer #3
·
answered by mircea b 2
·
0⤊
0⤋
Have you checked your mouse pad? try checking it.
Or maybe, your mouse may need some cleaning,
Or else, go back to the store where you bought that slow moving mouse and ask for its replacement....
2007-02-03 19:09:39
·
answer #4
·
answered by Janice 2
·
0⤊
0⤋
start-settings-control panel-mouse go in there, you should be able to set a faster speed, etc.
2007-02-03 18:47:17
·
answer #5
·
answered by MommyToo 4
·
0⤊
0⤋
go under the control panel and select the mouse. you can change alot of stuff there
2007-02-03 18:45:45
·
answer #6
·
answered by w2pc.com 3
·
0⤊
1⤋
what mouse is it, must be taskbar opition for that mouse check it out, or go to control panel look there
2007-02-03 18:46:11
·
answer #7
·
answered by ? 4
·
0⤊
0⤋
This problem is often caused by the pattern on your mousemat. Try turning the mat over and using the black underside or get on with an even pattern on it
2007-02-03 18:49:26
·
answer #8
·
answered by balijohn2006 2
·
0⤊
0⤋
buy a new one or replace the mouse pad
2007-02-03 18:46:28
·
answer #9
·
answered by rock girl 1
·
0⤊
0⤋
try freeing p ram and/or defragmenting ur comp - suggest using this software- Ace Optimizer Utilities
2007-02-03 18:46:16
·
answer #10
·
answered by ssuasw 3
·
0⤊
0⤋