I can't seem to find any studs even with a deep scanning stud finder.
2007-02-03 04:31:57 · 3 answers · asked by Crunch 1 in Home & Garden ➔ Other - Home & Garden
Use a small hammer lightly tap lissen for a hollow sound and a flat sound the flat sound is a stud...
2007-02-03 04:40:25 · answer #1 · answered by Infinite and Eternal Reality 5 · 0⤊ 0⤋
Can you get into the attic above it? If you can, then you can find the studs that way. Other then that, you might see if it's actually concrete or if there are ceiling tiles, what they're attached to.
2007-02-03 04:43:41 · answer #2 · answered by John 4 · 0⤊ 0⤋
24' spam of 2x10 it has allowable uniform loads for approximately MAXIMUM 5 lbs/sf .This zone is when you secured and support joists with two 4x4 one on top and one in bottom of the joists on two side of storage (if use hanging storage) . If using attic as storage a sheet of ply wood nail or screw to joist and divide weight all cross of the sheet.
2016-05-23 23:27:45 · answer #3 · answered by Anonymous · 0⤊ 0⤋