How many ways can a batsman be called out?

Answer 1

Btasmen can be out in ten ways:
1. Bold
2.Leg Before Wicket
3.Catch out
4.Stumped out
5.Run out
6.Handling the bowl
7.Obstructing the field
8.Hit wicket
9.Timed out
10.hit twice

Answer 2

A batsman can be out in 10 different ways as detailed below:

common, while the last four are technicalities which rarely occur. Briefly, the ten modes are:

1) Caught — When a fielder catches the ball before it bounces and after the batsman has struck it with the bat or it has come into contact with the batsman's glove while it is in contact with the bat handle. The bowler and catcher are both credited with the dismissal.

2) Bowled — When a delivered ball hits the stumps at the batsman's end, and dislodges one or both of the bails. This happens regardless of whether the batsman has edged the ball onto the stumps or not. The bowler is credited with the dismissal.

3) Leg before wicket (lbw) — When a delivered ball misses the bat and strikes the batsman's leg, pad or body, and the umpire judges that the ball would otherwise have struck the stumps. The laws of cricket stipulate certain exceptions. For instance, a delivery pitching outside the line of leg stump should not result in an lbw dismissal, while a delivery hitting the batsman outside the line of the off stump should result in an lbw dismissal only if the batsman makes no attempt to play the ball with the bat. The bowler is credited with the dismissal.

4) Run out — When a fielder, bowler or wicket-keeper removes one or both of the bails with the ball by hitting the stumps whilst a batsman is still running between the two ends. The ball can either hit the stumps directly or the fielder's hand with the ball inside it can be used to dislodge the bails. Such a dismissal is not officially credited to any player, although the identities of the fielder or fielders involved is often noted in brackets on the scorecard.

5) Stumped — When the batsman leaves his crease in playing a delivery, voluntarily or involuntarily, but the ball goes to the wicket-keeper who uses it to remove one or both of the bails through hitting the bail(s) or the wicket before the batsman has remade his ground. The bowler and wicket-keeper are both credited. This generally requires the keeper to be standing within arm's length of the wicket, which is done mainly to spin bowling. (Law 39)

6) Hit wicket — When the batsman accidentally knocks the stumps with either the body or the bat, causing one or both of the bails to be dislodged, either in playing a shot or in taking off for the first run. The bowler is credited with the dismissal.

7) Handled the ball — When the batsman deliberately handles the ball without the permission of the fielding team. No player is credited with the dismissal.

8)Hit the ball twice — When the batsman deliberately strikes the ball a second time, except for the sole purpose of guarding his wicket. No player is credited with the dismissal. (Law 34)

9)Obstructing the field — When a batsman deliberately hinders a fielder from attempting to field the ball. No player is credited with the dismissal.

10) Timed out — When a new batsman takes more than three minutes to take his position in the field to replace a dismissed batsman (If the delay is protracted, the umpires may cause the match to be forfeited). This rule prevents the batting team using time limits of the game to unfair advantage. No player is credited with the dismissal.

Answer 3

Bowled out, leg before the wicket (lbw), stumped, caught, run out, hit wicket.

These were some of the more common ways for a batsman to get out. Th following are the less common ones...

Handle The Ball:
If a batsman touches the ball with a hand not currently holding the bat, without the permission of the fielding side. This does not include being hit on the hand by a delivery, or any other non-deliberate action.

Obstructing The Field:
If a batsman deliberately interferes with the efforts of fielders to gather the ball or effect a run out. This does not include running a path between the fielder and the wicket so that the fielder cannot throw the stumps down with the ball, which is quite legal, but does include any deliberate attempt to swat the ball away.
Hit The Ball Twice:
If a batsman hits a delivery with his bat and then deliberately hits the ball again for any reason other than to defend his wicket from being broken by the ball. If the ball is bouncing or rolling around near the stumps, the batsman is entitled to knock it away so as to avoid being bowled, but not to score runs.
Timed Out:
If a new batsman takes longer than two minutes, from the time the previous wicket falls, to appear on the field.

Answer 4

1. BOWLED:
when the stumps are dislodged by the bowler ,the batsman is not able to strike the ball or defend it.

2. LEG BEFORE WICKET (LBW):
When the ball bowled by the bowler hits the batsman's pads without hitting the bat ,within the line and height of the stumps.

3. CAUGHT :
when the player of the opp. side catches the ball while it is in air.
(I) CAUGHT BEHIND:
When the ball hits the bat of the batsman to the wicketkeeper.

(II) CAUGHT AND BOWLED:
When the bowler himself takes a return catch.

4. RUN-OUT:
when the stumps are dislodged by any of the 11 players on the field while the batsman is short of the crease.

5. STUMPED OUT:
When the keeper takes the bails off with the ball bowled by the bowler
when the batsman is out of the crease in the first attempt.

6. HIT WICKET:
When the batsman himself unknowingly hits the stumps it is called hit wicket.

7. OBSTRUCTING THE FIELD:
when the batsman stands in the way of the player of the opp. team while fielding or covering the stumps deliberately when a player hits at it.

8.DOUBLE BAT:
When the batsman hits the ball once and then again hitting it for any reason other than stopping from going near the stumps.

9.TIME OUT:
When a batsman gets out the next man should come in within 2 minutes after the out batsman has left the field.

10. HANDLING THE BALL:
When the batsman catches the ball or takes it when it going to hit the stumps, taking the ball without the permission of fielding side.

IN ALL THE CASES THE FIELDING TEAM SHOULD APPEAL FOR IT THEN ONLY THE UMPIRE WILL GIVE HIM OUT .

Answer 5

1.Bowled

2. Caught

3. Stumped

4. Run out

5. Handling the ball

6 Obstructing the field.

7. Hit wicket.

8. LBW.

9. Not occupying the crease with 3 minutes.

10.Some other ways as the umpire deems fit.

Answer 6

caught, bowled, stumped, retired hurt, lbw, run out, timed out~de batsman is supposed to be in de screase within 3 min.s of the previous dismissal, he can be called out when he's hit by de ball or looses his balance n falls on de wickets, by hitting the ball twice, de batsman will be called out, and also if he abstructing the field!

Answer 7

A batsman be called out by Eight ways.
1. bold
2. hit wicket
3. LBW
4. catch out
5. stumped
6. run out
7. if a batsmen came late at ground
8. if a batsmen hit the ball with his hand, when it goes in stumps.(Hand out)

Answer 8

Bowled, lbw, run out, caught or not appearing at the crease within three minutes. That makes five that I know of.

Answer 9

10:

Caught, Bowled, LBW, Run out, stumped, hit wicket, timed out, handled ball, hit ball twice and obstructing the field.

Look: http://en.wikipedia.org/wiki/Cricket#Batting