I previously had 256MB and i added a 512MB. Have 2 slots and max of 2GB. It's an Emachines t2082 with Windows XP.
2007-02-02 18:19:44 · 11 answers · asked by secondopinion 2 in Computers & Internet ➔ Hardware ➔ Add-ons
RAM compatibility issuse. Both wafers should be from the same manufacturer and of the same type (PC2100, etc.) eMachines are a pain in the ***, trust me, I'm using one that I am in the process of rebuilding.
2007-02-02 18:31:20 · answer #1 · answered by Ouroboros0427 2 · 0⤊ 0⤋
This could be either a ram stick malfunctioning, the ram being incompatible one with the other or the ram brand is incompatible with your board, anyways, take your pc when you're buying new ram to test it, unless you've checked it out on Kingston.com that it'll work with your pc previously before buying it.
I'd rule out a loose ram stick cause it wouldn't start up if it's loose.
I do recommend Kingston :P
Cheers
2007-02-02 18:26:45 · answer #2 · answered by Julio M 3 · 1⤊ 0⤋
Check to make sure you put it in correctly, Emachines are proprietary systems, if you arent using the correct type of memory you will face compatibility problems. Find out what kind of PC it is such as eMachine and model # then find out exactly what type of Ram it takes such as SDRam pc133 and or DDR pc 2700, or 3200.
2007-02-02 18:25:40 · answer #3 · answered by sadeyzluv 4 · 0⤊ 0⤋
is this a computer? curiously like it!!! i'd not say it is going to bypass really quickly in case you bypass upload extra RAM, notwithstanding it is going to easily develop somewhat reckoning on your RAM speed, it truly is shared for pictures memory.
2016-11-02 04:46:53 · answer #4 · answered by ? 4 · 0⤊ 0⤋
You either have a bad stick of mem or you didnt follow the motherboard manual on what you can use for memory and how to install it!
2007-02-02 18:22:18 · answer #5 · answered by Anonymous · 0⤊ 0⤋
Sounds like the ram you installed may be bad or you might not have seated it properly.
2007-02-02 18:22:19 · answer #6 · answered by Brian 5 · 0⤊ 0⤋
fix the RAM properly
or
ur RAM would be damage and replace it
2007-02-02 18:22:27 · answer #7 · answered by Khalistan 1 · 0⤊ 0⤋
the memory is bad, return it
i work for a company that sells memory <---
2007-02-02 18:21:43 · answer #8 · answered by sickskillz883 5 · 0⤊ 0⤋
bad ram get it replaced.
2007-02-02 18:24:02 · answer #9 · answered by Mark J 2 · 0⤊ 0⤋
might be too much for the board
2007-02-02 18:22:25 · answer #10 · answered by babygurl 5 · 0⤊ 0⤋