Dipping the fork in water will help it slide into the outlet easier...
2007-02-02 17:25:12
·
answer #1
·
answered by Luke 3
·
5⤊
0⤋
Maybe you need to shrink the fork down, go put it in the microwave for about a minute, make sure you're standing in front of the microwave so you can see the fork and shut the microwave off, when its down to the size you want it. Good Luck!
2007-02-03 01:36:15
·
answer #2
·
answered by flacocajuncujo 4
·
2⤊
0⤋
Fill the basement with water, go down and open the fuse panel and turn off the electricity! That should take care of your lint worries!
2007-02-03 01:29:07
·
answer #3
·
answered by Anonymous
·
2⤊
0⤋
Remove or bend back all but 1 prong and then grind that one down so it is thin enough to fit properly. and if possible bend the end in to a hook to help pull out the lint.
YOU ARE USING A PLASTIC FORK? RIGHT?
2007-02-03 01:27:08
·
answer #4
·
answered by Aviator1013 4
·
2⤊
0⤋
what are you stupid you should never stick a fork into an outlet to clean out lint. a knife makes a much better tool for this task.
2007-02-03 02:37:26
·
answer #5
·
answered by JarrettSde3 2
·
1⤊
1⤋
I hope it is a plastic fork. Have you thought of using the vacuum cleaner?
2007-02-03 01:29:05
·
answer #6
·
answered by Anonymous
·
2⤊
0⤋
This is the time when a water pic comes in handy. Just fill the water pic with water, and squirt. Handy gaget. :)
2007-02-04 09:10:07
·
answer #7
·
answered by arum 3
·
1⤊
0⤋
Get on your hands and knees with a big mouthfull of water and squirt it in the hole.
2007-02-03 01:50:28
·
answer #8
·
answered by Ta Dah! 6
·
2⤊
0⤋
I have just had a look at your profile to see if you are as stupid as your question might suggest , your profile suggests that you are not incredibly stupid but probably mentally challenged !!
2007-02-03 01:32:56
·
answer #9
·
answered by Realist 2006 6
·
2⤊
0⤋
do yourself a favor seek help at the local nut house because you are trying to kill yourself
2007-02-03 01:27:04
·
answer #10
·
answered by Russ S 3
·
1⤊
1⤋