2007-02-02 13:31:34 · 3 answers · asked by Jim E 2 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
Yes, the check engine indicator is blinking and the engine is running rough. Recent repairs have included a new fuel pump and battery.
2007-02-02 15:03:20 · update #1
Make sure you connect the code reader then turn on the ignition switch... DO NOT start the vehicle..... the code reader will then read the computer and list the codes.... then you can erase the codes. After you erase them..... turn off the ignition, unplug the code reader, then start the vehicle, the check engine light will be off then.
2007-02-02 16:02:53 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Is the check engine light on? Are you sure that there are codes stored? Some more info might help.
2007-02-02 21:36:31 · answer #2 · answered by Mr. Badwrench 6 · 0⤊ 1⤋
i own a repair shop,and if the key is on,and the cable is connected right it almost has to load them in,if there was any to start with,go back over and make sure the prongs aren't bent over on it or anything,,its also possible your obd reader is not working right,good luck with it,i hope this help,s.
2007-02-02 21:39:55 · answer #3 · answered by dodge man 7 · 0⤊ 1⤋