2007-02-01 14:13:49 · 8 answers · asked by zombieskater100@sbcglobal.net 1 in Computers & Internet ➔ Hardware ➔ Other - Hardware
Dude......you have to have a solder gun, it you try to heat with the small butane torch your just going to burn the wiring or circuit board.
2007-02-01 14:17:24 · answer #1 · answered by Rider (12NI) 5 · 0⤊ 0⤋
With your level of knowledge, I wouldn't suggest doing this without parental or professional supervision. a soldering iron runs at (minimum) 30 watts of heat, and if you even brush the tip of it with your finger when hot it will burn you. And that's no lie.
You also need some solder. It is made of lead. Don't inhale the fumes.
2007-02-02 01:12:43 · answer #2 · answered by magu2k 3 · 0⤊ 0⤋
I guess you mean SOLDER, there is a fine solder foil available that you melt with a lighter or a match, how well it works.. hm, that's another question.
2007-02-01 22:16:19 · answer #3 · answered by Master U 5 · 0⤊ 0⤋
you need a soldering tool to solder wires
2007-02-01 22:17:04 · answer #4 · answered by KC 2 · 1⤊ 0⤋
*solder
And you cant. Tools are available for ~$10 at radioshack.
2007-02-01 22:16:22 · answer #5 · answered by John M 1 · 0⤊ 0⤋
u need a soldering iron ... or u use a crimping tool and connector ..or u twist them together and tape them ...
2007-02-01 22:16:39 · answer #6 · answered by Anonymous · 1⤊ 0⤋
You need to concentrate on your spelling first.
2007-02-01 22:16:34 · answer #7 · answered by Anonymous · 0⤊ 0⤋
sure and if it's not SOLDERED correctly it will not hold...
2007-02-01 22:18:37 · answer #8 · answered by Chrys 7 · 0⤊ 0⤋