i put it in 4 wheel drive high the tranalxe wors but the hubs wont lock in 4 wheel drive i like to findout of anyone can tell me how to fix it
2007-02-01 11:08:43 · 5 answers · asked by done h 1 in Cars & Transportation ➔ Maintenance & Repairs
Check vacuum lines to switch on transfer case. If no leaks found most likely a bad vacuum switch or servo located under battery.
2007-02-01 11:45:20 · answer #1 · answered by TonynNC 5 · 0⤊ 0⤋
I think the hubs are vacuum operated. There should be a vacuum line going to the front axle. Check for cracks or leaks.
2007-02-01 11:27:48 · answer #2 · answered by Den 1 · 1⤊ 0⤋
I had a short bed K-10 85' and mine did NOT have automatic hubs.
Are you sure they're automatic?
Try spinning the center dial on the hub to "lock"
2007-02-01 11:18:10 · answer #3 · answered by Mr. KnowItAll 7 · 0⤊ 0⤋
nicely you probably did no longer say if it develop into computerized or handbook yet i'm assuming that is computerized shift.that is you push a button to alter it over. the two you have broken the solenoid on the area of the flow case or probable bent the linkage or possibly broke a cord or the plug the place it hooks into the area of the flow case.
2016-11-02 02:15:54 · answer #4 · answered by Anonymous · 0⤊ 0⤋
take it to a 4x4 place and get them to check it out
2007-02-01 11:20:14 · answer #5 · answered by tweed801 5 · 0⤊ 0⤋