English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

8 answers

Use acetone (finger nail polish remover) it will strip away any sticky residue from your window.

What I do, though, is lick the stick pads to help them stick (gross, yes, but it works).

2007-02-01 10:15:27 · answer #1 · answered by Christmas Light Guy 7 · 0 0

Any good cleaner with ammonia will work. Make sure the glass is really clean (I've learned this from experience!) or everything will fall off. Also, Armor All makes a streak less glass cleaner that's great. Before you mount your detector and GPS, clean the suction cups with the same solution, and allow everything to dry before positioning them. Good luck!

2007-02-01 10:15:40 · answer #2 · answered by Capn Jon 3 · 0 0

I've tried just about everything, but i like the foaming window cleaners in aerosol cans the best. I usually go over the windows twice to make sure it gets everything. Dry the windows with the really cheap paper towels, like the ones in public restrooms. They don't leave any lint behind.

2007-02-01 10:18:51 · answer #3 · answered by Anonymous · 0 0

My considerable undertaking if I have been you would be blowing the cigarette lighter fuse working all those componets at as quickly as.keep the electronics to a minimum and locate which fuse is to your lighter and carry a pair extras and as somebody reported before it would be clever to have a mechanic do a "trip verify" Y'understand if it is your automobile you may annoying twine someof those contraptions in with their very own fuses

2016-12-13 06:31:58 · answer #4 · answered by jeniffer 4 · 0 0

rubbing alcohol will work..

Even consider a dash mount?
I glued velco on the bottom of my radar detector then a small strip on my dash. Works great!

oh, 3M double face tape on the velco part that goes on the dash.

2007-02-01 10:17:48 · answer #5 · answered by asgrafxx 3 · 0 0

Use regular rubbing alcohol. It will remove oils that cleaning products don't always get. Let it dry completely. Should work good.

2007-02-01 10:15:22 · answer #6 · answered by janellyvanilly1276 2 · 0 0

white vinegar

pour a bit onto a lint-free cloth or paper towel

wipe specific area

polish dry

2007-02-01 10:15:20 · answer #7 · answered by Treadstone 7 · 0 0

any window cleaning solvent and use newspaper to wipe it away.

2007-02-01 10:11:00 · answer #8 · answered by sleepydo 5 · 0 0

fedest.com, questions and answers