2007-02-01 07:49:11 · 13 answers · asked by Mark N 1 in Home & Garden ➔ Garden & Landscape
screws
2007-02-01 07:59:41 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Hi! I had problems when I lived on high land and everyone else (down from me) had no trouble with wind and gales! Rules, apart from ensuring the panels are not too wide and are securely fixed to supports that are firmly fixed to the ground, is to make sure the fence panels aren't excessively high and not supporting climbers like Clematis or Lonicera (for example) which can be very heavy plants. A trellis design rather than closed lapped fencing is also a good idea. Hope this helps. Good luck.
2016-03-15 03:37:03 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Fence Panel Wedges
2017-01-11 15:51:34 · answer #3 · answered by Anonymous · 0⤊ 0⤋
What you need are the thick wooden upright posts. You get special metal spikes that you cement into the ground and secure the uprights into those when the cement sets. Then you screw the panels to the upright posts. Just ask someone at B&Q - preferably a man aged over 40 if you can find one!
2007-02-01 08:03:14 · answer #4 · answered by Anonymous · 0⤊ 0⤋
If you have fence panels set between concrete posts, wedges work wonders. I use little bits of left over slats and knock them in. You cant see them.
If you have wooden posts, it sounds like you will need to have them concreted in. Dont bother with the metal spikes called met posts unless you have to fix say a pergola to the side of a house etc. They are useless in soil. Most fencing firms like mine only concrete in the posts for longevity of the fence.
2007-02-04 10:06:48 · answer #5 · answered by vanessa p 2 · 0⤊ 0⤋
There were so many woodworking plans with this collection and you will not believe this but there are over thousands plans in the one package deal. Go here https://tr.im/N9D43
This is really something to find that many all together. For someone like me who is just really starting to get involved with woodworking this was like letting me loose in a candy store and telling me I could have anything I wanted. That was my dream when I was a kid.
2016-02-09 21:43:51 · answer #6 · answered by ? 3 · 0⤊ 0⤋
If you have concrete posts, then try Fence Panel Grips, revolutionary new product that is guaranteed to work
2014-07-26 10:06:27 · answer #7 · answered by Anonymous · 1⤊ 0⤋
Want you like to get instant access to over 16,000 woodworking plans?
Check it out https://tr.im/6834b
Along with stone, mud and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.
2015-01-25 23:48:56 · answer #8 · answered by Anonymous · 0⤊ 0⤋
Wooden wedges, assuming you are talking about panels, in the concrete posts, if you use any nails make sure they are galvanised
2007-02-01 08:47:00 · answer #9 · answered by woodworker143 2 · 0⤊ 0⤋
Go to Home Depot or Lowe's and get some "Deck Screws". That will hold the pickets in place. I put my entire fench up using them and nothing comes loose!!!
2007-02-01 08:36:27 · answer #10 · answered by bugear001 6 · 0⤊ 0⤋
Long nails bang them in to hold them togther.
2007-02-01 08:22:46 · answer #11 · answered by taxed till i die,and then some. 7 · 0⤊ 0⤋