And also are there any torque specifications / order while re installing . The car has a 1.5 sohc motor .
2007-02-01 03:58:09 · 4 answers · asked by wesley_1971 4 in Cars & Transportation ➔ Maintenance & Repairs
no . just hand tighten all the bolts. do it again after test drive.
2007-02-01 04:02:41 · answer #1 · answered by LEXUSRY 5 · 0⤊ 0⤋
this is sucking air! sounds like Dad's neglected something,there's a pipe that runs from the cam container and splits into 2 pipes,one great is going to the backside of the air filter out housing,the different smaller diameter is going to a stub on the inlet manifold, if the two of those is off,or holed or broken the engine will suck air in by using those,and this air isn't measured by skill of the air bypass meter so the gas air blend is all to hell. so examine that pipe,examine the inlet manifold and everywhere else between the AFM and the throttle physique.
2016-09-28 06:54:26 · answer #2 · answered by ? 4 · 0⤊ 0⤋
No, I would seal the gasket only to the cover to retain it in place. No need to seal it to the head.
2007-02-01 04:49:58 · answer #3 · answered by cottagstan 5 · 0⤊ 0⤋
NO,NOT NECESSARY
2007-02-01 04:04:09 · answer #4 · answered by Cobra 2 · 0⤊ 0⤋