2007-01-31 00:21:42 · 9 answers · asked by wrongjon 3 in Home & Garden ➔ Other - Home & Garden
Go to the iron mongers and purchase a new yale barrel, it comes with new keys, remove the three screws on the back of the yale plate on the inside of the house, withdraw the barrel from the door, insert the new barrel, refit the back plate, job done for only a few pounds.
2007-01-31 01:22:14 · answer #1 · answered by Sparky 3 · 1⤊ 1⤋
Firstly I hope it is your own lock! Try either buying a complete new lock and fitting or you'll need a locksmith to do that for you which may cost a small fortune. Do you know a local handyman who might have a go?
2007-01-31 02:37:44 · answer #2 · answered by garfish 4 · 0⤊ 0⤋
depends on how it broke if flat try supper glue put it on the bit your left with hold it to the broken bit, bit of luck it should slip out good luck if that fails take the lock to bits then gently tap the back of the barrel that might work
2007-01-31 00:30:17 · answer #3 · answered by fergie 11 4 · 0⤊ 0⤋
Try using pliers,a locksmith will charge at least £100, good luck.
2007-01-31 00:32:33 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Try a pair of pliers or tweezers.Good luck
2007-01-31 00:25:17 · answer #5 · answered by Ollie 7 · 0⤊ 0⤋
Try a pair of tweezers. This worked for me.
2007-01-31 00:25:01 · answer #6 · answered by Anonymous · 0⤊ 0⤋
same as above use tweezers, and a lot of WD 40.
2007-01-31 00:27:17 · answer #7 · answered by didi7 2 · 0⤊ 0⤋
try magnet, tweezers or push a lump of playdoh in and see if when you remove it it grips
2007-01-31 00:26:55 · answer #8 · answered by angie m 2 · 1⤊ 0⤋
try using a magnet to pull it out.
2007-01-31 01:06:49 · answer #9 · answered by audifey 2 · 0⤊ 1⤋