Asus M2N32 AM2 motherboard
http://www.newegg.com/Product/Product.asp?Item=N82E16813131013
Antec 900 Case
http://www.newegg.com/Product/Product.asp?Item=N82E16811129021
Basically the question is, will all the hookups work with this board? I went to compusa to physically look at it, and there was like...30 or so hookups, like the LED, Reset, Power hookups, but there was weird names on them ive never heard of. Though, ive never actually built a computer, but I have taken about, 12 apart and put them back together, and none have had what this case had. And, I cant remember the names otherwise I would look them up.
Thanks for the help ahead of time
2007-01-29 07:42:27 · 4 answers · asked by Mashu 4 in Computers & Internet ➔ Hardware ➔ Desktops
That is a an AMD board, Im going with Amd 4200 64 X2. And I am planning on putting Dual cards in at a later time, so, the PSU is going to be around 650 watts or so. Maybe a 750 if I can find a reasonably priced one.
2007-01-29 09:03:12 · update #1
YES it is COMPATABLE
The motherboard is 570 SLI MCP ATX AMD Motherboard
The TOWER CASE supports the following
Motherboard Compatibility ATX / m-ATX
And the motherboard is ATX ;)
2007-01-29 07:47:39 · answer #1 · answered by Danlow 5 · 1⤊ 0⤋
I saw the case --- .Motherboard Compatibility ATX / m-ATX
and the motherboard is
ASUS M2N-SLI Deluxe Socket AM2 NVIDIA nForce 570 SLI MCP ATX AMD Motherboard
The motherboard is an ATX type so it should fit.
But before you buy check the URLs out first, since you do not know about motherboards, especially the 2d URL. From there you can read about the latest boards coming out, One thing I learned though. You want to go core 2 dual rather than dual core. In the core 2, you are able to upgrade more than the dual core but you can read about it in one of the articles. Buy AMD
2007-01-29 16:00:30 · answer #2 · answered by Big C 6 · 0⤊ 0⤋
The case is a bit different from normal cases, the rear fan is near I/O panel which is not so good.
But if you have the motherboard manual, which is in english there will be no problem. The reset, power and HDD led are with 2 color cable. Te colored one is for+ and white for -. Connect them and try till they work, have the same problem with some BIOSTAR and ECS motherboards.
2007-01-29 15:50:28 · answer #3 · answered by LynX 3 · 0⤊ 0⤋
Chances are yes... most cases have all the screw holes and connectors required for most any board. Also you may want to get a bad *** power supply for a nice case like that! Hope you're going to be running ATI or NV always over 2 on the card! you may want stupid bays!
2007-01-29 15:48:16 · answer #4 · answered by Micronx 2 · 0⤊ 0⤋