Pls. suggest a inexpensive & sure way to clean a traditional Water
filter with (ceramic candle).Also suggest a inexpensive & sure way
to clean a HiNARi LifeStyle Model#J371,2000Watts domestic kettle,
due to hard water problems/usage the metal heating element had
gotten deposited with salts.
2007-01-28 16:57:31 · 9 answers · asked by Anonymous in Home & Garden ➔ Maintenance & Repairs
Plain white vinegar will clean your kettle. Just fill it about a 1/3 full let it sit for several hours and rinse thoroughly. You may be able to use a product like CLR made especially for removing hard water deposits but check the label as far as using on food containers. As for your water filter I am not really sure what that is. If the filter is replaceable, I see no problem with the same techniques and a new filter.
2007-01-28 17:12:00 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Always remember... Hard water deposits have a ph o8 thru 14. and acid products have a ph of 6 dn thru 1 so you must bring this to neutral a ph of 7 draw this scale on a pc of paper you will better under stand it ... now if its an alkiline the ph is above 7 and acid below 7
so it takes an acid to remove the alkline.. Use the product to fit the need. I am not a chemist but was a sales consult,,, and selling cleaning products. some of the ans above are very good. BJ
2007-02-01 09:22:13 · answer #2 · answered by william j 1 · 1⤊ 0⤋
Add 1 cup white vinegar to your kettle and boil. Pour out contents, refill with water, swirl it around a bit, pour it out. Refill with fresh water, and all should be ok. I'm not sure about the filter.
2007-01-29 01:36:58 · answer #3 · answered by jammer 6 · 0⤊ 0⤋
i htink you can find help here
Descale-It ® Products Company
We offer a complete product line of effective cleaning and descaling products. Take the work out of cleaning by letting Descale-It products such as Lime-Eater, Bathroom Descale-It, Toilet Bowl Cleaner, Pool and Spa Descale-It, Cooler Treatment, SeaSpots Gone!, Scalesolve and Descale-It Earth-Friendly Cleaner for Animals do the work for you. Descale-It products can be used for both household and industrial applications.
http://www.descale-it.com/
2007-01-29 15:38:09 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Soak or boil in white vinegar. It should soften and dissolve deposits. If your water is this hard you can have problems in shower heads.. hot water tanks....laundry.... and plumbing lines can get really coated and blocked up in time. A water softener would really help you all the way around.
2007-01-29 01:19:09 · answer #5 · answered by janeyw 2 · 0⤊ 0⤋
vinegar is a bad solution because it acts very slowly,if at all.
the cheapest and best is tu put a spoon of lemon salt(you buy at a supermarket) allso colled citric acid, it's used in food, and after you washit with water ,no taste will left.after this, once a week use a litle table spoon once a week for maintenance.
2007-01-29 07:06:12 · answer #6 · answered by MONI 3 · 0⤊ 0⤋
product called CLR
2007-01-29 01:53:42 · answer #7 · answered by johnryan123 2 · 0⤊ 0⤋
a liitle acid may help
2007-01-29 01:08:43 · answer #8 · answered by Jatin P 1 · 0⤊ 0⤋
CLR
2007-01-29 01:04:54 · answer #9 · answered by Anonymous · 0⤊ 0⤋