Please take a look at the following URL (its a txt of my hard disk info) and tell me if its SATA 2:
http://localhostr.com/files/310e16e732a576d21630.txt
Thanks
2007-01-28 13:38:45 · 4 answers · asked by 3zzy 2 in Computers & Internet ➔ Hardware ➔ Other - Hardware
It is configured for sata 1 but you have to remove the jumper to make it sata 2. Here is the tech spec from the web page.
To support your application requirements the Barracuda 7200.9 is configured as a SATA 1.5Gb/s interface but can be easily configured to SATA 3Gb/s by removing a single jumper on the drive.
2007-01-28 13:49:44 · answer #1 · answered by psx2gamer 2 · 1⤊ 0⤋
It's SATA II... based on the spec's listed in the manual at http://www.seagate.com/support/disc/manuals/sata/100417177a.pdf the drive has a burst rate of up to 300 mb/s wihich is a feature of SATA II. SATA I has a burst rate of 150 mb/s
It may be dropping back to SATA I speeds due to motherboard limitations.
2007-01-28 21:45:22 · answer #2 · answered by Fremen 6 · 1⤊ 0⤋
according to seagate's website it is a SATA 2 drive
2007-01-28 21:45:24 · answer #3 · answered by jonwalkerr 3 · 0⤊ 0⤋
no it is running on ATA 100
2007-01-28 21:41:33 · answer #4 · answered by colinh33 2 · 0⤊ 1⤋