Where can i start on writing a 4 page essay on cisco routers and switches?

Question

This assignment is for my WAN technology class. I just do not no where to begin. I thnk the switch we are using is an 2950.

I would appreciate any ideas. Thanks a bunch.

Answer 1

A wide area network (WAN) is a computer network that covers a broad geographical area (i.e., any network whose communications links cross metropolitan, regional, or national boundaries). Or, less formally, a network that uses routers and public communications links. Contrast with personal area networks (PANs), local area networks (LANs), campus area networks (CANs), or metropolitan area networks (MANs) which are usually limited to a room, building, campus or specific metropolitan area (e.g., a city) respectively. The largest and most well-known example of a WAN is the Internet.

WANs are used to connect (LANs) and other types of networks together, so that users and computers in one location can communicate with users and computers in other locations. Many WANs are built for one particular organization and are private. Others, built by Internet service providers, provide connections from an organization's LAN to the Internet. WANs are often built using leased lines. At each end of the leased line, a router connects to the LAN on one side and a hub within the WAN on the other. Leased lines can be very expensive. Instead of using leased lines, WANs can also be built using less costly circuit switching or packet switching methods. Network protocols including TCP/IP deliver transport and addressing functions. Protocols including Packet over SONET/SDH, MPLS, ATM and Frame relay are often used by service providers to deliver the links that are used in WANs. X.25 was an important early WAN protocol, and is often considered to be the "grandfather" of Frame Relay as many of the underlying protocols and functions of X.25 are still in use today (with upgrades) by Frame Relay.

Academic research into wide area networks can be broken down into three areas: Mathematical models, network emulation and network simulation.

Such a network generally requires the crossing of public right-of-ways, and relies at least in part on circuits provided by a common carrier. Typically, a WAN consists of a number of interconnected switching nodes. A transmission from any one device is routed through these internal nodes to the specified destination device. These nodes (including the boundary nodes) are not concerned with the contents of data; rather their purpose is to provide a switching facility that will move the data from node to node until they reach their destination. Performance improvements are sometimes delivered via WAFS or WAN Optimization.

http://en.wikipedia.org/wiki/Wide_area_network

Answer 2

not sure what details your instructor wants included but I would go to www.cisco.com and get the specs on the switch. Also the website www.howstuffworks.com is a good resource to help you get an understanding of the way switches and stuff work.