2007-01-28 01:33:54 · 8 answers · asked by wkufloridian 1 in Home & Garden ➔ Maintenance & Repairs
The problem ls in the water fill relay located on a metal plate that is part of the hose hookup with two wires that go to it. The washer will not agitate or spin uness the tub fills with water to the desired level. Check connections on the relay and if they are good then replace the relay.
2007-01-28 01:43:14 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Might be the lid safety switch. There is a hole in the top of the washer that a pin on the lid fits into to push a switch that indicates the lid is closed. If the pin is broken off or if the switch is out of position or faulty the machine will not pump water out or spin...Good Luck...
The switch has to be made (meaning completing the circuit) for the spin cycle to work. So disconnecting it will not make it work.. Connecting the wires together will make it work but is an unsafe condition and I wouldn't recommend it... Luck Again..
2007-01-28 01:41:35 · answer #2 · answered by Ret68 6 · 1⤊ 0⤋
Most of the answers are close to right , take a pencil or small stick and press lighty on the little switch try and listen or maybe feel the click it will will be real slow, if you don;t hear it that might be your problem, the switch goes to the wig wag assembly it is a soleneniod that is enerergixed by that switch, you will have to call a repairman for that one, Good luck
jim
2007-01-28 01:47:05 · answer #3 · answered by mr_jim51 3 · 0⤊ 0⤋
This is very common in washers, I do not remember the name of the part, but I had a repair company come in and labor + part was only $65. The part is less than $2 dollars.
2007-01-28 05:30:55 · answer #4 · answered by Anonymous · 0⤊ 0⤋
It may be the switch when you put the cover down,open the whole top up and unplug it and see if it works then
2007-01-28 01:38:19 · answer #5 · answered by Larry m 6 · 0⤊ 0⤋
I hear theres a locking mechanism that gets stuck on it try to find that on it and see.
2007-01-28 01:38:30 · answer #6 · answered by HEAR TO HELP 4 · 0⤊ 0⤋
You need to call a repairman.
2007-01-28 01:41:28 · answer #7 · answered by Zelda Hunter 7 · 0⤊ 0⤋
sounds like the timer is broke
2007-01-28 01:40:36 · answer #8 · answered by jnsitsjustme 1 · 0⤊ 0⤋