when spraying two pack do i apply the laquer before the basecoat dries or do i let the basecoat dry before applying the laquer......
not sprayed metallics before...ta
2007-01-28 01:03:19 · 6 answers · asked by phuk1t 3 in Cars & Transportation ➔ Maintenance & Repairs
Mist on the base coat untill you are happy with the colour ,Then mix the laquer 2-1 / 10% thinner , by the time this is mixed the base will be just about ready for the laquer .
It doesnt really matter as you only mist on the base anyway and is virtually dry within a few minutes , so dont go to heavy with the base, that`s when you start to get reactions as the base is taking to long to dry .
2007-01-28 01:52:07 · answer #1 · answered by charlotterobo 4 · 0⤊ 0⤋
sand it down with grade 300 sand paper and then spray with the basecoat and the lacquer just makes it nice and shiny.
need any help just e mail me.
good luck
2007-01-30 08:01:16 · answer #2 · answered by richard a 3 · 0⤊ 0⤋
let the basecoat go off for ten mins then apply lacquer
2007-01-28 01:15:24 · answer #3 · answered by LYNN C 1 · 0⤊ 0⤋
If bonnet change into basically painted might want to were waxed too, so if paint sparkling you received't get residue on pads. ought to allow factors outdoors get on first to work out if pads get residue on them in a pair of months. sparkling coat protects paint from chicken droppings and acid rain.this basically an statement seeing i do not understand if for practice or primary driving.
2016-10-17 03:48:01 · answer #4 · answered by ? 4 · 0⤊ 0⤋
put first coat on let dry then flat off with 1200 grade wet and dry repeat process until happy with colour then apply lacquer
2007-01-29 22:59:37 · answer #5 · answered by Anonymous · 0⤊ 0⤋
Not sure about that side of it but be careful not breath any in, it's bad stuff!
2007-01-28 01:09:23 · answer #6 · answered by Dr. 2 · 0⤊ 0⤋