when i ping the gateway ip;i got 0% loss but still can't access my router.
2007-01-27 11:16:06 · 6 answers · asked by vanessa 4 in Computers & Internet ➔ Computer Networking
ethernet connection.i only get page cannot be displayed when i type in the gateway ip address on the ie address bar.ipconfig...default gateway is 192.168.1.1.pinged the gateway ip=0% loss.
2007-01-30 09:58:53 · update #1
i was able to connect using this set-up 2 weeks ago.it just quit working & then now i can't even access the router.
2007-01-30 10:07:29 · update #2
go to your web browser and type 192.168.1.1 and the username is admin w/ no password
2007-01-27 11:26:36 · answer #1 · answered by SaM 2 · 0⤊ 1⤋
The advice given above is only true if you still have the factory default settings. You can restore your router to default settings by holding down the reset button for at least 5 seconds.
But it would help to know
1) Which linksys router you have
2) Are you trying to connect wired or wireless
3) What shows up in your browser when you go to the gateway IP
2007-01-27 11:38:02 · answer #2 · answered by jc_nyc01 2 · 1⤊ 0⤋
Make sure you are connected with an ethernet cable and not wirelessly. You didn't say if it was a wireless router, but most wireless routers won't let you access the admin page wirelessly unless you've set that option. That is, the very first time you access the admin page, you have to be connected while hardwired. If you then set the option to connect to the admin page wirelessly (which can be a possible security hole), you can connect wirelessly after that first time.
2007-01-27 11:47:48 · answer #3 · answered by rongee_59 6 · 1⤊ 0⤋
Hmmmm.
By default you should be able to access the router's web interface at http://192.168.1.1
Have you tried resetting the router? Unplug it, wait 30 seconds then plug it back in.
2007-01-27 11:26:08 · answer #4 · answered by osxrulz 3 · 0⤊ 1⤋
you might try re-installing the software...but I believe in the manual it tells you or maybe in the installation (read me file) on how to access your router...I myself have a belkin router and for me to access it by typing in internet explorers browser I type it like 198.168.2.0 and that puts me on the configuration page of the router.......most are like that see if that helps ya.......
2007-01-27 11:26:50 · answer #5 · answered by Boogieman 3 · 0⤊ 1⤋
check wired or wireless connection.
do a (ipconfig /all) to see if your default gateway has changed
2007-01-27 14:26:26 · answer #6 · answered by liammad2002 1 · 1⤊ 0⤋